0
Hoping you have not blown a head-gasket, it does not sound like it but check the dip stick for milky oil anyway. Most likely you have sprung a leak in the cooling system, either in the hoses or the rad. itself. It's possible the water pump is failing but get the cooling system pressure tested first before worrying about the pump
What else can I help you with?
If the water reaches a maximum temperature of 26.4 degrees celsius how many joules of heat were released by the pebble?
To calculate the heat released by the pebble, we need to know the mass of the water and the specific heat capacity of water. Using the formula Q = mc∆T, where Q is the heat released, m is the mass of water, c is the specific heat capacity of water, and ∆T is the change in temperature (from initial temperature to 26.4°C), you can find the answer.
How much heat is needed to raise 8 kg of water from 4 degrees Celsius to 83 degrees Celsius?
The heat needed can be calculated using the formula: Q = mc∆T, where Q is the heat, m is the mass of water, c is the specific heat capacity of water (4186 J/kg°C), and ∆T is the change in temperature. Plug in the values to find the heat needed.
When using magma and water to create energy the magma's heat turns water into?
Steam is produced. The steam pressure can be used to drive turbine or piston driven electrical generators.
A calorimeter contains 0.750 kilogram of liquid water at 17.0 degrees C. A 0.0580 kilogram block of copper at 98.0 degrees C is placed in the water. What is the final temperature of the system?
The heat lost by the copper block equals the heat gained by the water and calorimeter. Using the heat equation, q=mcΔT, where q is the heat, m is the mass, c is the specific heat, and ΔT is the change in temperature, you can calculate the final temperature of the system as 26.2 degrees Celsius.
What is geothermal energy and hydrothermal energy?
Geothermal energy is energy produced using the heat from under the earth.Hydrothermal is energy produced by using the different temperatures of water. Places in the Tropics with warm surface water but also deep cold water are most suitable.Both geothermal and hydrothermal are renewable and clean.
Can you pump water using heat?
yes
How can snow be melted quickly without using water?
One way to quickly melt snow without using water is by applying heat directly to the snow. This can be done using a heat source such as a blow dryer, heat gun, or even a campfire. The heat will cause the snow to melt and turn into water.
My Car heater doesn't blow heat immediately when car is started?
You can not get heat from cold water, The engine has to run long enough to get the water in the engine HOT. That is were you get heat from HOT WATER-- Coolent
If the water reaches a maximum temperature of 26.4 degrees celsius how many joules of heat were released by the pebble?
To calculate the heat released by the pebble, we need to know the mass of the water and the specific heat capacity of water. Using the formula Q = mc∆T, where Q is the heat released, m is the mass of water, c is the specific heat capacity of water, and ∆T is the change in temperature (from initial temperature to 26.4°C), you can find the answer.
What are some effective ways to ensure a consistent supply of hot water without using heat?
One effective way to ensure a consistent supply of hot water without using heat is to install a solar water heating system. This system uses the sun's energy to heat water, providing a renewable and sustainable source of hot water. Additionally, using a heat recovery system can help capture and reuse waste heat from other processes to heat water, reducing the need for additional heating sources.
Does heating water requires electricity?
No, you can heat water in many ways:fire using solid, liquid, or gaseous fuel.nuclear heat source.geothermal heat source.solar heater.etc.
What are the benefits of using a hot water heat pump for heating water in residential buildings?
A hot water heat pump can save energy and money by efficiently heating water using ambient heat from the air. This can reduce electricity bills and lower carbon emissions compared to traditional water heaters.
When you boil water cover a campfire you are using what?
heat energy
How much heat must be removed from 5.0 g of water at 10 degrees C to become ice at 0 degree C?
The heat removed can be calculated using the formula: q = mcΔT, where q is the heat removed, m is the mass of the water, c is the specific heat capacity of water, and ΔT is the change in temperature. First, calculate the heat required to cool the water from 10°C to 0°C using the specific heat capacity of water. Then, calculate the heat required to freeze the water at 0°C using the heat of fusion for water. Add the two values together to get the total heat removed.
How do you heat water using an iron?
Please don't. Irons are not submersible and you may get an electric shock from attempting to heat water with one.
What is radiator in case of heat engine?
Radiator is a device to cool the heat engin using water as a coolent
How does a water pot boiler work to heat water efficiently?
A water pot boiler works by heating water in a closed container using a heat source such as a stove or electric element. The heat causes the water to boil and turn into steam, which then rises and transfers heat to the surrounding water. This process efficiently heats the water in the pot.
