answersLogoWhite

0

sample dicompose purpose........

User Avatar

Wiki User

13y ago

What else can I help you with?

Continue Learning about Earth Science

What is sulphated ash?

The sulphated ash test is an analytical test for determining the inorganic content of a sample by weight. The sample ( usually 1g) is accurately weighed into a platinum, silica crucible that has been previously ignited, cooled and weighed. The sample in the crucible is then subjected to sulphuric acid (usually 1mL) and charred at a low temperature without causing ignition of the sample until there are no more white fumes given off. The crucible with the charred sample is then placed in a furnace (temperature is dependent on monograph but typically it can be from 600 to 900 degrees celcius) until all organic matter has been burnt off. The crucible is cooled and re-weighed. The difference in sample weights being the sulphated ash content remaining. Some monographs require the sample to be re-ashed until a constand weight has been achieved. The remaining inorganic matter is typically metal oxides from most samples.


ash dust smog acid rain noise and auto exhaust are all examples of ________.?

air population


Do Ash and Emma kiss in H2O?

Yes, Ash and Emma share a kiss in the TV series H2O: Just Add Water. Their romance begins to develop throughout the show as they become closer.


How do you raise pH in well water for home?

To raise pH in well water for home use, you can use soda ash (sodium carbonate) or lime (calcium hydroxide). Start by testing the current pH level of your well water using a pH testing kit, then follow the manufacturer's instructions to add the appropriate amount of soda ash or lime to achieve your desired pH level. Be cautious and follow safety guidelines when handling these chemicals.


What do farmers and gardeners add to their soil if it is acidic?

Farmers and gardeners add limestone, dolomite, or wood ash to acidic soil to raise the pH level. This process helps neutralize the acidity and make the soil more suitable for plant growth.

Related Questions

What is the difference between sulphated ash and residue on ignition?

The only difference between sulphated ash and the residue on ignition is the terminology. The residue on an ignition is sulphated ash.


What is difference between sulphated ash and heavy metal?

Not so important differences: Heavy metal ash (but also in general ash): ash resulting from the calcination of a material; practically is a mixture of oxides. Sulphated ash: the sample is initially treated with sulphuric acid and the residues are calcined.


Why used sulfuric acid in sulphated ash test?

Sulfuric acid is used in the sulphated ash test to convert the inorganic components present in the sample to their sulfates. This step helps in ensuring complete combustion of organic material and facilitates the determination of the ash content accurately. The use of sulfuric acid also helps in removing any carbon residues that may be present in the sample.


What is difference between sulphated ash and residue on ignition?

Sulphated ash is the amount of inorganic residue left when a sample is ignited after treatment with sulfuric acid. On the other hand, residue on ignition is the amount of material left behind when a sample is ignited without any prior treatment. Sulphated ash is typically used for organic materials, while residue on ignition is often used for inorganic materials.


What is sulphated ash?

The sulphated ash test is an analytical test for determining the inorganic content of a sample by weight. The sample ( usually 1g) is accurately weighed into a platinum, silica crucible that has been previously ignited, cooled and weighed. The sample in the crucible is then subjected to sulphuric acid (usually 1mL) and charred at a low temperature without causing ignition of the sample until there are no more white fumes given off. The crucible with the charred sample is then placed in a furnace (temperature is dependent on monograph but typically it can be from 600 to 900 degrees celcius) until all organic matter has been burnt off. The crucible is cooled and re-weighed. The difference in sample weights being the sulphated ash content remaining. Some monographs require the sample to be re-ashed until a constand weight has been achieved. The remaining inorganic matter is typically metal oxides from most samples.


What is the reaction between soda ash and sulphuric acid?

The reaction between soda ash (sodium carbonate) and sulfuric acid forms sodium sulfate, water, and carbon dioxide gas. This is a neutralization reaction where the acid reacts with the base to form a salt and water.


What is the chemistry behind sulphated ash content test?

Sulfated Ash is the ash content of fresh sample being analyzed as determined in the method. Indicates level of metallic (inorganic) contents in the sample. The sample is first chared with concentrated Sulfuric Acid at low temperature in Platinum / Silica crucible and then incinerate the sample in furnace at 600 - 900°C. At this temperature the organic components are fully burnt and only the ash remains, consisting of metal oxides and contaminants. By fuming off the sample with concentrated sulfuric acid the oxides in the ash are transformed into sulfates. The difference in weight serves as measurement. UDAY SALUNKE


How much soda ash to neutralize 68 percent phosphoric acid?

To neutralize 68% phosphoric acid, you would need to add soda ash based on the molar ratio of the acid and base. The chemical equation would be 2Na2CO3 + 3H3PO4 → 6NaH2PO4 + CO2 + H2O. You would need to calculate the exact amount of soda ash required based on the stoichiometry of the reaction.


What is the Importance of determining the total ash and acid insoluble ash content of drugs Give their possible composition?

The residue left after incirenation of the crude drug is designated as ash. The residue obtained usually represents the inorganic salts naturally occuring in the drug and adhering to it.it varies with in defininte limits according to the soils, it may also include inorganic matter deliberately added for the purpose of adulteration. Hence, an ash value determination furnishes the basis for judging the identity and cleanliness of any drug and gives information relatives to adulteration/contamination with inorganic matter, thus ash values are helpful in determining the quality and purity of drug. The total ash of crude drug reflects the care taken in its preparation. The acid insoluble ash is a part of the total ash that is insoluble in dilute hydrochloric acid. A higher limit of acid-insoluble ash is imposed, especially in cases where silica may be present or where calcium oxalate content of the drug is higher Procedure given in indian pharmacopeia was used to determine the different ash values such as total ash, acid insoluble ash, and water - soluble ash value.Ash is inorganic residue remaining after the water and inorganic matter have been removed by heating in the presence of oxidizing agents, which provides a measure of the total amounts of minerals within the foodsThe acid insoluble ash (AIA) content is the proportion of a sample that is not hydrolyzed by 72% sulphuric acid and is not subsequently volatilized upon the incirenation of this acid insoluble residue.


What pool chemicals do I add to restore balance to the pH of the pool?

To raise the pH of your pool you add soda ash (sodium carbonate). To lower the pH of your pool add muriatic acid (hydrochloric acid) or sodium bisulfate. You should always add chemicals with the pump running and check your levels again once the newly added chemicals have been circulated around the pool.


What is constant weight during sulphated ash test?

During the sulphated ash test, constant weight refers to achieving a stable mass of the sample after it has been ignited to remove any organic material and drive off volatile substances. This step ensures that all organic components have been effectively burned off, leaving behind only the inorganic residues for accurate measurement. Constant weight indicates that the sample has reached a point where no further change in mass occurs, confirming complete combustion.


What is the use of soda ash?

to neutralize acid