0
What else can I help you with?
What is difference between sulphated ash and residue on ignition?
Sulphated ash is the amount of inorganic residue left when a sample is ignited after treatment with sulfuric acid. On the other hand, residue on ignition is the amount of material left behind when a sample is ignited without any prior treatment. Sulphated ash is typically used for organic materials, while residue on ignition is often used for inorganic materials.
Is there a difference between residue on ignition vs. residue on evaporation?
Yes. The residue left is material that did not ignite or products of the ignition reaction.The residue remaining after evaporation is the non-volatile substances in the solutionsubjected to the evaporation.
Why add sulphuric acid in sulphated ash?
Sulfuric acid is added in the process of determining sulphated ash to help decompose organic matter present in the sample to ensure complete combustion. This is important to accurately measure the inorganic residue left behind, which is the sulphated ash content.
What is difference between sulphated ash and heavy metal?
Not so important differences: Heavy metal ash (but also in general ash): ash resulting from the calcination of a material; practically is a mixture of oxides. Sulphated ash: the sample is initially treated with sulphuric acid and the residues are calcined.
What is sulphated ash?
The sulphated ash test is an analytical test for determining the inorganic content of a sample by weight. The sample ( usually 1g) is accurately weighed into a platinum, silica crucible that has been previously ignited, cooled and weighed. The sample in the crucible is then subjected to sulphuric acid (usually 1mL) and charred at a low temperature without causing ignition of the sample until there are no more white fumes given off. The crucible with the charred sample is then placed in a furnace (temperature is dependent on monograph but typically it can be from 600 to 900 degrees celcius) until all organic matter has been burnt off. The crucible is cooled and re-weighed. The difference in sample weights being the sulphated ash content remaining. Some monographs require the sample to be re-ashed until a constand weight has been achieved. The remaining inorganic matter is typically metal oxides from most samples.
What is difference between Loss on drying and Residue on ignition?
im no expert but loss on drying refers to weight of mass after you dried something and then take that amount away from the pre died weight (so you have to know the initial weight) for residue on ignition are we still talking weight ? if so fire up the dry matter and then weigh wat you got left buddy Loss on drying means at a define temp.how much volatile matter driven off form your sample means after ending the test you will get the sample without moisture and volatile matter but in residue on ignetion all part of organic matter will removed and only inorganic matter will present because we are finding how much inorganic impurity present in your sample (Dhiraj K.Thakur Abbott Healthcare)
What is the difference between waste and residue?
Solid wastes are non-liquid materials ranging from municipal garbage to industrial wastes that contain complex and sometimes hazardous substances. Solid wastes also include sewage. Residue is greenhouse emissions.
What is the difference between salt water residue and fresh water residue?
The difference is that saltwater is salty, doesnt taste good, and your not supposed to swallow it. Also saltwater is good to gargle if you have a sore throat. In the other hand fresh water is healthy for you, cools you down, and you can swallow it. Also 70% of your body is made of fresh water.
Why spark plugs should be clean?
If there is any residue on the spark plug, it will not produce a sufficient spark for the engine ignition.
What are two ways that you could tell the difference between pure water and salt water?
Taste Smell Melting Point Boiling Point Density Residue after it evaporates
What the difference between carbonate residue and an impression?
Carbonate residue refers to the leftover deposits created by the reaction of carbonates with other elements in a material, while an impression is a mark or indentation made by a foreign object pressing into a surface. In geology, carbonate residue may indicate the presence of minerals, whereas impressions can reveal details about the object that made them.
What is the difference of garbage and trash?
Garbage is useless residue whereas the trash is useless thing.
