you dont
Sharp Aquos is a brand of TV. You can't program it to control another brand of TV.
You cannot control your Sony Receiver with your Sharp TV remote. Sharp remotes can control many brands of DVD and Blu-Ray players, but only Sharp receivers. You should program your Sony receiver's remote to control your TV instead. How you do this is outlined in your owners' manual.
How to program etec re10
You need to use the pamphlet that came along with the remote control. You need to put in the code number for your TV.
You must access the menu fuction.Autosearch or manual add or erase channels.
To program a URC-R6 universal remote for a 32-inch Sharp TV, first, turn on the TV. Then, press and hold the "TV" button on the remote until the red LED light turns on, then release the button. Next, press and hold the "Select" and "Enter" buttons simultaneously until the red light blinks and turns off. Finally, enter the appropriate code for Sharp TVs, which can be found in the remote's manual, and if successful, the TV will turn off.
Hi Dear, These are the codes fore sharp TV 011,,034,049,058,181,20,216,226
You can't use the Sharp remote on the Dish receiver but you can program the DISH remote to the Sharp TV. The codes for the Sharp TV are: 741, 739, 521, 629, 526, 628, 740, 669, 670, 607, and 608.I have also provided the instructions on how to program the remote to your TV.Remotes: Basic (Television Only)Turn the Television On.Press and hold the clear TV button for three seconds until the LED flashes.Enter the three-digit code using the buttons on the number pad.Press #. Note: The LED will flash three times.Test functionality with the TV.Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.
The codes are 011, 020, 025, 027, 037, 052, 053, 059, or 060.
how do i program a charter remote to a rca tv
i need program instructions or sharp ga035sb univer remote
To program a Sharp television using the Cisco HDA-IR2 remote for Time Warner Cable, you typically need to enter the appropriate TV code. Common codes for Sharp TVs include 0171, 0051, and 0060, but it's best to consult the remote’s user manual for the exact code. Enter the code using the remote's setup process, which usually involves pressing the "TV" button followed by the "Setup" button and then entering the code. If the TV turns off, the code is correct; if not, try the next code.