store flat to minimize drying at the writing tip
It doesn't have to be! I have very short hair, and it's blonde. Obviously if you're going for the emo/goth look, it helps for it to be black, but if not, lighter hair's fine. (:
This is usually caused by a bad socket. When you put the lighter in it grounds out the positive and negative wires. Change out the socket and lighter and it will work fine.
I wouldn't recommend it because the lighter fluid is just a liquid and the normal jet lighter fuel is a compressed gas. Having the gas compressed forces the gas out with the perfect amount of pressure. If you just put a liquid in it, it will just sit there and not do anything; maybe if you pressurize it and then make it into a fine mist when it comes out then it might work, but it wouldn't be too practical because it would be cheaper to buy butane than mod your lighter.
It sounds like you have a short in the wire or you have a loose connection.
$75 or 30 hours of community service. in the state of California.
Any cigarette lighter adapter designed for the PalmOne will work fine. They are all, for most purposes, exactly the same.
Floating shelving would be fine for lighter objects. If you want to put heavier objects on the shelves then regular shelves are recommended because they are more sturdy.
it is fuse 25 under the hood of the car in tha fuse box but I put in a 20 fuse amp because that is all I had and works just fine.
Well, you should not keep them outside on a sunny day for a long time because the sun attracts to black surfaces or colors, but if it isn't sunny you should be fine.
if the fuses are good and the lighter element is good but no power, you probably have a burnt lighter assembly. there is a fusible link behind the assy, where you push the lighter in, you gotta remove it and see if it burned, probably is, replace it. good luck.
Well it is really fine. The drawbacks if any would be the color fading. Try to get some treatments or protectors for it.
because you do not have fine prints