answersLogoWhite

0

What else can I help you with?

Related Questions

Why wont the horn blow on 1996 Dodge Grand Caravan?

Usually the horn and cruise control go together because of the clock spring. It needs to be replaced and there is a recall for it.


Why wont the Horn does not to work on a 1996 Honda accord?

A horn might not work on a 1996 Honda Accord because of a blown fuse. There is also the possibility that the wire was cut or damaged. The horn is part of the security system. A used car might have the horn wire cut because the previous owner was annoyed by the horn blaring when someone came near the car.


1996 Saturn sl1 that wont shift the shifter is loose and wont engagehow do fix it?

I have this same problem. A broken shifter box. I will repost a fix as soon asap.


Why wont your sunroof close on your 1996 Nissan maxima?

it can be due to several reasons but it would be best if you take it to a repair shop to get it fixed.


Can a horn relay be the reason why the horn wont blow?

It could be the relay or the fuse or the horn itself. Or, it could be all three!


Why wont your horn work on your 1995 harley?

You have a loose wire, blown fuse or a faulty horn.


200 Pontiac grand am and your horn wont stop honking?

horn will not stop honking on my 2004 pontica grand am


Why wont your 1992 Saturn start that has fire?

because its on fire


Vw cabrio horn wont stop blowing I have a 97 VW VW Cabrio and the horn wont quit I took the red off the battery and when it reconnects the horn wont stop any help THANKS email fiestyverminyahoo.com?

YOU HAVE ACTIVATED THE CARS ALARM,PUT YOUR KEY IN THE DRIVERS DOOR LOCK AND TURN IT TWICE TO THE RIGHT.


2001 Saturn ion fuse panel?

I have a Saturn 2001 300 L . The lights on the inside of car wont work.


Push on horn and it wont blow why on your 2004 Chevrolet Cavalier?

Check the fuse?


What are the possible reasons why your 96 Honda civic horn wont sound?

Check obvious fuses, connections. Also the horn is operated by a momentary switch inside the horn button on the wheel, I would check for good clean contact. If it has an airbag, follow proper procedures to remove the cover. If you do remove it, build some jumpers to check continuity from the switch, to the connecter under the hood.