0
What else can I help you with?
Is there a recall on the 2005 Chevy steering shaft?
there is but it just puts lube in the intermediate shaft
Will a intermediate steering shaft fit from a 1996 Dakota on a 1997 Dakota?
No
What is an intermediate shaft?
An intermediate shaft is a part of a car. It connects the end of the steering column to the rack and pinion gear box and is used to eliminate torque sheer.
What causes a popping noise in steering column when turning?
I heard it was an intermediate steering shaft and cost around 130.00 dollars
What is a intermediate shaft on the steering column?
It's part of the steering column and if yours is making klunking noises it has to be repaired at the dealer.
How do you replace the steering column shaft coupler on a 1998 Dakota?
1. Position the front wheels straight ahead. Place a steering wheel holder, SNAP-ON TOOL, p/n WA96A, or equivalent, between the steering wheel and the driver's seat to secure the wheel. 2. Remove the toe plate nuts (Figure 1). 3. Remove the pinch bolt and nut securing the upper intermediate shaft to steering column. 4. Open the hood of the vehicle and remove the pinch bolt securing the lower intermediate shaft to the steering gear. 5. Compress the intermediate shaft and remove it from the vehicle. 6. Feed the new intermediate shaft, p/n 55351171AA, through the cowl panel and install it onto the shaft splines of the steering gear. Then, compress and/or lengthen the intermediate shaft enough to be able to install the shaft onto the lower end of the steering column. 7. Secure the intermediate shaft to the lower end of the steering column with a new pinch bolt, p/n 06504926AA, and nut, p/n 06101510, and tighten the nut to 49 Nm (36 ft. lbs.). 8. Secure the intermediate shaft to the steering gear with a new pinch bolt, p/n 06504926AA, and tighten the bolt to 49 Nm (36 ft. lbs.). 9. Install the toe plate onto the cowl panel studs. Tighten the toe plate nuts to 10 Nm (90 in. lbs.). 10. Remove the steering wheel holder from the steering wheel. Information removed from www.alldatapro.com
Does the power steering fluid need to be changed when replacing the steering shaft on a 2002 Tahoe?
no, the intermediate steering shaft is completely independent of the power steering fluid operation. Make sure that when you remove the shaft, you DO NOT move the steering wheel. The clockspring inside the wheel is very easily damaged. no, I don't see why.
Your 1990 dodge Dakota sport has new power steering pump and pinion and you still have Armstrong steering?
Most likely cause is that the intermediate steering shaft has a bad Joint(s). Replace the steering shaft and you'll be good to go. This shaft is connected to the steering gear box on one end and the steering colum at the other.
Dodge Dakota power steering steer hard when cold?
Universal joints in the steering intermediate shaft are starting to seize. Get a new one at rouckauto.com.
87 Dodge Dakota 4x4 starter removal?
You have to remove the steering intermediate shaft and remove the starter from the top.
Is it unsafe to continue driving when the intermediate steering shaft needs to be changed or fixed?
That is absolutely unsafe. Get is fixed ASAP.
How do you remove and install a steering shaft on a 2006 Pontiac GTO?
To remove the steering shaft on a 2006 Pontiac GTO, first disconnect the battery and remove the steering column covers. Then, detach the steering wheel by removing the retaining nut and pulling it off. Next, unbolt the universal joint at the base of the steering shaft and the intermediate shaft from the steering column. To install, reverse the process, ensuring all bolts are torqued to the manufacturer's specifications and reconnect the battery.
