0
What else can I help you with?
What are the torque settings and tightening sequence for the cam box on a rover 200 t series?
Rover 20T2N 2.0Ltr Diesel engine Cam cover torques are listed as 12 Nm. No tightening sequence is listed .
What are the valve cover torque specs for 2002 Saturn Vue?
The valve cover torque specifications for a 2002 Saturn Vue typically range from 89 to 106 inch-pounds (10 to 12 Nm). It's important to follow a specific tightening sequence when applying the torque to ensure even pressure across the cover. Always refer to the vehicle's service manual for detailed instructions and specifications for your specific engine type.
What is the valve cover tightening sequence for a 1993 SL2?
A Valve cover dons't have a tightening sequence, you probably mean the head. On my 93 Saturn sl1 the valve cover only had 2 screws with a gasket. To look up what the tightening sequence for the head would be you would have to look in a repair manuel. I could give you what mine is but if its wrong you could risk bending your head sense their not the same cars. Repair manuels you can usually pick up at autozone or checkers auto for a 10-20 bucks. Plus they would be very handy on putting the rest of the car back together if you have your head off.AnswerYes a valve cover does have a tightinig sequence as well as a tourque spec, especially on a 16v motor with a aluminum cover. why do people answer questions when they don't know the answer is beyond me.
What is the proper bolt tightening sequence for an 08 dyna outer primary cover?
The proper bolt tightening sequence for an 08 Dyna outer primary cover typically involves starting from the center and working your way outward in a crisscross pattern. This helps ensure even pressure across the cover. Begin by tightening the bolts to the specified torque in several steps, gradually increasing to the final torque specification recommended in the service manual. Always refer to the manufacturer's guidelines for the exact torque values and sequence.
What is the torque rating and tightening sequence for a valve cover on a 1990 Honda CRX 15 liter 4-cylinder?
hondahookup.com has manuals
What is the proper torque for value cover for a 4efe engine?
The proper torque specification for the valve cover on a 4EFE engine is typically around 7.2 to 9.8 ft-lbs (or 10 to 13 Nm). It's important to follow a proper sequence and to avoid over-tightening, as this can cause warping or damage to the valve cover. Always refer to a service manual for the most accurate specifications for your specific vehicle.
Where is the timing belt in an 03 Saturn Ion?
Ion's have timing chains and they are on the front of the engine. Requires removal of front engine cover and rocker cover to access
What is the torque and tightening sequence for the valve cover gasket for a 1992 for tempo 4 cylinder?
Torque for valve cover bolts is 7 to 10 ft. Lbs . Tighten the bolts in a criss-cross pattern .
What is the manufactured torque spec on a valve cover when tightening the bolts on 2001 FORD expedition?
Tighten the valve cover retaining bolts in sequence, torque them to 71-106 inch lbs. (8-12 Nm).
What are the torque setting for a e46 rocker cover?
For the BMW E46, the torque setting for the rocker cover (valve cover) is typically around 10 Nm (Newton-meters) or 7.4 lb-ft. It's important to follow a specific tightening sequence to ensure even pressure across the cover. Always consult the vehicle's service manual for the exact specifications and procedures for your specific engine variant.
What is the valve cover torque specs on a 240sx?
The valve cover torque specifications for a Nissan 240SX, particularly for the SR20DET engine, typically are around 7.2 to 9.0 ft-lbs (10 to 12 Nm). It’s important to follow a proper sequence when tightening the bolts to ensure even pressure across the valve cover. Always consult the vehicle's service manual for the most accurate and specific information related to your engine model.
Tightening sequence and torque valve cover gasket e320?
To properly tighten the valve cover gasket on a Mercedes-Benz E320, follow a specific sequence to ensure even pressure across the gasket. Start by hand-tightening the bolts in a crisscross pattern, then use a torque wrench to tighten them to the manufacturer’s specified torque, typically around 10-12 Nm (Newton-meters). It’s important to do this in several steps, gradually increasing the torque to avoid warping the cover. Always consult your vehicle's service manual for the exact specifications and sequence.
