The ignition on a Chevrolet Cobalt will not turn with the key if it is does not correct align inside. This will block the cylinder from turning and prevent starting.
Put it in park , insert the ignition key into the ignition and turn the key to start it.
You can install undercarriage lights to have them turn on with your dome lights on a 2005 Chevrolet Equinox by installing the LED tailgate light bar.
cant turn the key ignition on my 1996 aerostar ford
you might need a new ignition
u cant
i think you have to push in the tripometer turn on ignition and then wait second, turn off the ignition and turn back on i did it once but cant remember all of it
It may be that when you shut down your car earlier you had your steering wheel turned just so. Try inserting your key in the ignition and turn your steering wheel just slightly and see if that will unlock the switch. I had that happen to me and that is all I needed to do. Hope this helped.
To reset the anti-theft alarm on a Chevrolet Equinox, first ensure that the vehicle is unlocked using the key fob or the physical key. If the alarm is still active, turn the ignition to the "On" position without starting the engine and leave it for about 10 minutes. This should allow the system to reset. If the alarm continues to trigger, consult the owner's manual or contact a dealership for further assistance.
Yes the 2005 Chevrolet Equinox is technically union made.......Here is the catch........The Engine is made in China......The Transmission is made in Japan.......But the whole vehicle and some body parts are made and the whole vehicle is assembled in Ingersoll Ontario Canada, which in turn is UAW-Canada. So Yes and No if that makes sense.
Turn the ignition key to ON. Don't start engine. Press accelerator pedal to floor 3 times. Turn ignition off. Must do this within 5 seconds. Job done.
HOW TO REPLACE FRONT TURN SIGNAL BULB 2007 EQUINOX