use a wheel puller
Two choices: use the special distributor drive puller, or take the engine completely apart. I recommend the puller.
* Make sure the blades are clean. * Which type of fan blade are you asking about? In general, a fan is a more efficient 'puller' than a 'pusher'. This is why primary radiator fans are almost always mounted behind the radiator. You can use 100% of the fan's air-moving capacity when you use it as a puller. When you use it as a pusher, you lose some efficiency as the fan is able to push air that does not go through the heat exchanger. Of course, the application is critical here. What are you trying to do with your fan? If you want a HEPA-filtered room, you don't want to use a puller fan, you want a pusher.... If you want to have the fan do the most efficient work possible, then use it as a puller. * If you're trying to sleep and the room is hot, point the fan at your feet. They serve as a sort of thermostat for the rest of your body, so if they're cool, the rest of you will feel cool, too.
That requires the use of a power steering pulley PULLER. ( A special tool ) The pulley is pressed on.
You can use it to power a turbo for the engine to gain horse power.
To use a gear puller effectively, first, position the puller over the gear you want to remove. Then, tighten the puller's jaws securely around the gear. Finally, use a wrench to turn the puller's center screw, applying pressure to pull the gear off its shaft.
When the engine is on, batteries are being recharged. If you use a lot of electric power when the engine is off, you can drain your battery to the point where it will no longer be able to start your engine, and you will need to jump-start it.
Engine Power! Internal combustion engine.
to cool down the engine
Use insulated plug wire puller to notice if the engine slowes down and misses when wire is removed
Use a power steering pulley puller to remove the pulley. This special purpose tool should cost about $8. Remove the three bolts. Be happy you thought to ask this question.
no