The Oldsmobile Cutlass Cierra window lift motor is located inside of the door. Each window is equipped with a window lift motor.
replace a window lift motor for a 2002 gmc sierra?
video on how to replace window lift motor on j30
bad power window motor
The lift plate is at the bottom of the window, that pushes the window up, and pulls it down. The regulator is the motor, and linkage that is attached to the lift plate to drive it.
the window is both side power is not working
Remove the inside door panel. Remove the wiring harness from the window motor. Remove the track linkage. Remove the window motor retaining screws. Reverse the process to install the new window motor.
To remove the window lift motor on a 2000 Chevy S10, first, ensure the window is fully up and disconnect the negative battery cable. Then, remove the door panel by unscrewing any visible screws and gently prying it off to access the interior components. Locate the window lift motor, disconnect the wiring harness, and remove the mounting screws. Finally, carefully pull the motor out of the assembly to complete the removal.
i need to get the left rear door off to install the window lift motro . but i can not get this cover off need help
Yes, remove the door panel, remove the window motor. You should be able to lift the window up.
The motor and/or window regulator may need fixing or replacing. See "Related Questions" below for more
You have to drill out the rivets. a replacement motor will come with bolts and nuts to go back together