you could possibly have some sort of shortage
It's the motor assembly that causes the door to go up and down.
I suspect the rod that opens the door has come loose or broken off the door handle and is keeping the window from coming down. Take the inside door panel off and check. If needed just replace the door handle.
If the window is stuck in the down position on a Chevy Silverado, the door panel will have to come off to access the cable mechanism and fix the window. If the windows are electric, there will also be the wiring assembly for the window to remove.
Window regulator and motor
A person a can open the rear door from the inside. Get into the car from another door that will open and open it from the there.
you need to replace the window regulator in the door. some come with a motor some come without. ask your local parts dealer.
dodge truck power window mmotor not running and window falls down
I think they put those door panels on with liquid nails. But seriously, I managed to get my window down by beating on the door. Once I got the windown down I pryed the door panel lip out of the window lip. The door panel still did not want to come off. At this point I decide the heck with it and I just ripped it off. It came off with no problems. You can start at the bottom and rip it off, it will come off, do not be afraid of ruining it. It will come off. It is just harder then heck to rip it off.
Open the door!!
What is the problemtry holding the switch down and have someone slam the door,it worked for me.
push down on the button at the rear of the door where the window meets.
you need to take the door panel off first. roll the window down just a little until you can get to the clips on the bottom of the window. then while holding onto the window undo the clips that are at the bottom (be careful not to break the clips most of the time the window does not come with new clips). be careful the window could fall down inside the door when you release the clips if you don't have a good grip. slowly pull the window out. sometimes you have to loosen up the regulator to release the tension on the window.