0
What else can I help you with?
If there are four appliances connected to a single power source in series then the number of current paths is equal to .?
the answer is 1.. either 1 or 3 not sure. its deffinatly not 2 or 4 its deffinatly 1 XD
If Four 12 voltsbatteries connected in parallel and one 12 volt battery in series how much voltage is active across circuit?
A == B (- 12V +) (- 12V +) (- 12V +) A single 12V battery in series with 4x 12V batteries connected in parallel... Total voltage from A to B is 24 volts! Note that the single battery in series will limit the total current capacity to that of a single battery.
What will happen if 2 phase load is connected to generator?
There is no such thing as a two phase load any more. Any two legs from a three phase system are classed as single phase. If this single phase load is connected across the generator it will induce an imbalance in the output voltages of the generator. This is one reason that single phase loads on a three phase generator should be shifted around to find the best possible balance.
What is the output when a secondary voltage of 24V is connected to bridge rectifier when no load is connected?
24VACRMS * 1.414 = 33.94VACPEAK The unloaded filtered DC voltage is 33.94V The unloaded unfiltered voltage will be a single polllarity AC voltage with a peak of 33.94V
What is the working of a Darlington amplifier?
it is a combination of two transistors connected in series. the emitter of transistor t1 is connected to the base of transistor t2 . now the total circuit acts as a single transistor. this combination will gives high gain, as the gain is multiplied.
How much pathways are there for moving charges in a series circuit?
In a series circuit, there is only one pathway for the movement of charges, through all the components connected in a single loop. This means that the current passing through each component is the same, as it is determined by the total voltage applied and the total resistance of the circuit.
How many pathway does a series circuit have?
A series circuit has only one pathway for electric current to flow. This means that all parts of the circuit are connected in a single loop, so the current passes through each component in sequence.
Single pathway of feeding relationships?
Food-chain.
The neural pathway of a single reflex is called?
Reflex Arc
If there are four appliances connected to a single power source in series then the number of current paths is equal to?
the answer is 1.. either 1 or 3 not sure. its deffinatly not 2 or 4 its deffinatly 1 XD
If there are four appliances connected to a single power source in series then the number of current paths is equal to .?
the answer is 1.. either 1 or 3 not sure. its deffinatly not 2 or 4 its deffinatly 1 XD
How are all the components in a series circuit connected?
In a series circuit, the components are connected end-to-end in a single loop, creating a single pathway for the current to flow. This means that the current passing through one component is the same that passes through all other components in the circuit. If one component fails, it can disrupt the flow of current through the entire circuit.
What is the purpose of a single pole 240v breaker in an electrical circuit?
A single pole 240V breaker is used in an electrical circuit to protect the circuit from overloading and short circuits. It helps to safely distribute electricity and prevent damage to the wiring and appliances connected to the circuit.
What kind of circuit do you have when all resistors are in a single pathway?
its called a complete circuit
A circuit in which all parts are connected in a single loop is called a?
A circuit in which all parts are connected in a single loop
Which vertebrates use a single-circuit pathway for moving oxygen through their body?
Fish
How many H D D are connected to a single PC?
2 H D D are connected to a single PC
