Check it with a voltmeter or with a voltage detector.
The wire feed welder is a MIG welder.
The line wire will be hot and carrying power when the breaker is on. The load wire will not be hot and will have no voltage on it until it is connected with the line wire.
No, you can feed it with a 2 wire Romex + ground. It depends on what is mounted on the ceiling. If it is just a light all you need is 2 wire + ground Romex. However if it is a fan/light and you want to control each one independant of the other you will need to use 3 wire Romex + ground. This is of course if you have 2 seperate switches. You would then connect the red wire to the blue light wire and the black wire to the black fan wire. If you use 2 wire Romex just connect the blue and black fan/light wire to the black wire in the ceiling box.
The feed line is the cable or other transmission line that connects the antenna with the radio transmitter or receiver
Wire sizing of a feed conductor is based on the amperage that a device draws. To calculate amperage from KVA a voltage of the supply has to be stated. Without this voltage and whether the transformer is single or three phase an answer can not be given.
Wire feed speed in MIG welding is calculated by multiplying the welding current by the wire feed rate. This formula helps determine the speed at which the welding wire is fed into the weld pool during the welding process.
The wire feed welder is a MIG welder.
One is a Miller Suitcase wire feed storage device that is used for feeding wire to an argon welding machine. Work wire is jewellery and pendants that are made from working wire into different shapes.
what is the engine control switch feed wire on a distributer
green one
2 wire has a live wire to energise the field where as the single wire alternator self energises and does not need the powered feed.
Information is incomplete. You need to know the load in Watt or Kilowatt and the voltage on the secondary side to determine the load current, on which the size of the wire is designed.
insulate the 'live battery feed wire'. i.e.; electrical tape. Or, replace wire.
The dark green/orange wire is the power feed.
Yellow
no
The line wire will be hot and carrying power when the breaker is on. The load wire will not be hot and will have no voltage on it until it is connected with the line wire.