A kilovolt ampere (kV.A) is used to measure the apparent power of a load, whereas the watt (W) is used to measure its true power. These two quantities are related through the power factor of the load, i.e. the cosine of the phase angle (the angle by which the load current leads or lags the supply voltage): true power = apparent power x power factor
So, as you can see, in order to answer your question, you need to know the power factor of the load. As power factor can vary between 0 and 1, the answer could be as low as zero watts to as high as 6.5 kilowatts.
It should do so easily; 1.5 HP is only about 1100 watts, which is significantly less than 3.5 kVA.
Six KVA is the same as 6000 watts. As you can see, the appliances have to be totaled up to the amount of 6000 watts to see how many can be used. Each device has its own wattage on the manufactures label and it is usually different for different appliances.
A 1-ton AC can melt a ton of ice in 24 hours. The power needed is theoretically 3517 Watts so allowing for power factor and efficiency you would need a 7 kVA generator.
65 KW
1HP = 746 watts 15 HP = 11190 watts = 11.19 kW You would need a generator of at least 13kW. UPS Distributor for 15 Years.
Yes, 2.8 kVA is equal to 2800 watts. This is because 1 kVA is equivalent to 1000 watts, so 2.8 kVA would be 2800 watts.
8,000 watts = 8 kVA / (the power factor) If the power factor is 1, then 8 kVa = 8,000 watts.
2.5 kVA is equal to 2500 watts.
0 - 1000. KVA times a power factor gives you kilowatts, 1000 x watts. If the power factor is 0, then o watts make up your one kVA; if the power factor is 1, then 1000 watts make up your one kVA. Typical power factor is in the range of .8 to 1.
There are ~5.9 kVA with 5600 watts and a power factor of 0.95. power factor is defined as the real power (watts) divided by the complex power (volt amperes): .95 = 5600/VA VA = 5600/.95 = 5894.7VA = 5.89kVA
It could be as much as 63 kW (63,000 Watts) into a load with a power factor of 1.0. For other loads, multiply the kVA by the power factor.
There are 1,000 watts (W) in a kilowatt (kW) and 1,000 volt-amps (VA) in a kilovolt-ampere (kVA). Therefore, 1 kVA is equal to 1 kW.
Formulas you need for single phase calculations. KVA = I x E/1000, KW = I x E x pf (where pf = power factor). For your question multiply the KVA by the power factor to get KW and then move the decimal point three places to the right to get watts. They are virtually the same. A watt is volts times amps. KVA is thousand of volts time amps. KVA and KW ratings are the same.
1hp = 735.5 watts 16,000 kVA / 735.5 = 21.754 hp
1 kVA (kilovolt-ampere) is equal to 1,000 VA (volt-ampere). The relationship between VA and watts depends on the power factor of the electrical system. For a system with a power factor of 1 (perfectly efficient), 1 kVA is equal to 1 kW (kilowatt). However, for systems with lower power factors, the relationship between kVA and kW will vary.
There are a few components missing from your question. I need to know either the voltage or the amperage and the power factor. For single phase, the formula for Kilowatts is Amps x Volts x pf/1000. The formula for Kilovolt-Amperes is Amps x Volts/1000. As you can see more info is needed.
The term horsepower has several definitions, depending on usage. According to WikiPedia, the Electric Motor usage is 746 watts. One kva (kilo-volt-amp) is 1,000 watts, so you might be able to say that one kva is 746,000 watts. Unfortunately, kva depends on phase angle and, except for a power factor of one (purely resistive), kva is not the same as kw (kilo-watts). Someone else with more knowledge than I will need to enhance this answer.