0
Yes, Romex cable—formally known as NM (non-metallic) cable—is generally permitted for residential use in Westchester County, New York. However, its usage is subject to specific conditions and local code requirements.
✅ When Romex Is Allowed
Romex is typically allowed in residential buildings, particularly in one- and two-family homes. For instance, in the Village of Hempstead, Romex wiring is permitted for residential use only.
While this example pertains to Hempstead, it reflects a common practice in many New York jurisdictions, including parts of Westchester County.
⚠️ Important Considerations
Building Type: Romex is usually restricted to residential buildings. In commercial settings or multi-family dwellings, alternative wiring methods like BX (metal-clad) or conduit systems may be required.
Installation Practices: Even in residential settings, Romex must be installed according to the National Electrical Code (NEC). For example, NM cable should not be used in exposed locations where it could be subject to physical damage.
Permits and Licensing: In municipalities like Sleepy Hollow within Westchester County, all electrical work must be performed by a licensed contractor, and permits are required for most electrical installations.
🔍 Final Thoughts
While Romex is generally legal for residential use in Westchester County, it's crucial to consult with the local building department or a licensed electrician to ensure compliance with all applicable codes and regulations. Requirements can vary between municipalities, so verifying with local authorities will help ensure your electrical work is safe and up to code.
If you need assistance finding a licensed electrician in your area or have more questions about electrical installations, feel free to ask!
What else can I help you with?
What is Electrical sheathing?
Electrical Sheathing is various forms of metallic or non-metallic covering over conductors. Nonmetallic-Sheathed Cable is what is known by the brand name Romex.
Can indoor Romex wiring be used outdoor as long as it is inside of PVC conduit?
No, according to the electrical code the cable has to have a underground rating. That said many home owners do install indoor rated cable in PVC black water pipe and bury it for outdoor installations.
Can a remodel job be wired with romex if the home is wired with conduit?
Yes unless there were some overarching electric code reason why conduit was used in lieu of Romex. if in doubt ask an electrician.
What is the difference between romex 14 2 14 3?
In romex, 14-2 means two conductors, 14AWG each, and 14-3 means three conductors, 14AWG each. Note: Normally, romex has a ground, so the designation is more likely to be 14-2/G or 14-3/G.
Can you run Romex through a wire mold?
The key is that you don't want to cause over-heating in wire. The answer is you can probably do what you want unless it involves high current and a small cross section in wire mold such that the Romex could generate too much heat. You could always strip out the wires inside the Romex and just run them in the wire mold.
What is the amp rating of 14/2 Romex cable?
The amp rating of 14/2 Romex cable is typically 15 amps.
What is the maximum amperage capacity of a 20 amp Romex cable?
The maximum amperage capacity of a 20 amp Romex cable is 20 amps.
What is the amp rating of 6/3 Romex cable?
The amp rating of 6/3 Romex cable is typically around 55 amps.
What is the trade name for this cable romex?
Romex is the trade name for non-metallic sheathed cable manufactured by Southwire Company, LLC.
Is it permissible to run Romex cable in conduit?
Yes, it is generally not permissible to run Romex cable in conduit because Romex is already insulated and designed for use without additional protection. Running Romex in conduit can lead to overheating and potential fire hazards.
Why can't you run Romex in conduit?
Romex cable cannot be run in conduit because it is not designed to be used in that way. Romex is a type of non-metallic sheathed cable that already has its own protective outer jacket. Running it in conduit can cause overheating and damage to the cable, potentially leading to a fire hazard. It is important to follow the manufacturer's guidelines for proper installation of Romex cable.
Is Romex in conduit allowed?
No, Romex cable is not allowed to be run inside conduit. Romex cable is intended to be used in exposed or concealed applications within buildings. If conduit is used, it should contain individual THHN/THWN wires instead of Romex cable.
Is romex wiring legal in queens New York?
Not legal
What is a general name used for a common household electric cable?
Modern NM/ Romex
What are the installation requirements for using Romex cable in a raceway?
Romex cable can be used in a raceway if it meets certain requirements. The installation must comply with the National Electrical Code (NEC) and the raceway must be large enough to accommodate the cable without damaging it. Additionally, the raceway must be properly secured and supported to prevent damage to the cable.
Does the NEC permit 2 wire Romex staple on edge?
Yes, the NEC permits 2-wire Romex staple on edge when installed properly. Staples should be positioned so that they do not damage the cable's insulation and are secure without over-compressing the cable. It is important to follow NEC guidelines for the correct installation of Romex cable to ensure safety.
What gauge romex for outlets?
Romex is a manufacturer's wire cable trade name, the 10 refers to the size of the wire inside the cable set. A #10 AWG copper conductor with an insulation factor of 90 degrees C is rated for 30 amps.
