answersLogoWhite

0

What else can I help you with?

Continue Learning about Electrical Engineering

What causes a brownout?

There are many causes of power failures in an electricity network. Examples of these causes include, faults at power stations, damage to power lines, substations or other parts of the distribution system, a short circuit, or the overloading of electricity mains.


What is the advantage of corona in power system?

Advantages of corona in power system


What is RRRV in power plants?

Rate of Rise of Re-striking Voltage is a voltage which is found when fault occurs in a power circuit protected by Circuit Breaker. This voltage may be twice the system voltage.


What is Dstatcom?

D-STATCOM (Distribution Static COMpensator) and its new controller system, that be able to both mitigate all types of faults and operate as a Distributed Generation (DG), when it supplies power to sensitive loads while the main utility source is disconnected (i.e. it is under islanded operating condition


Function of earth fault relay?

An "earth fault relay" is a bit ambiguous. A relay used in the power system to detect neutral or ground faults measure the vector difference of the three phase power, or measure the neutral current directly. If current is above a set trip point, the relay will operate. If you are referring to GFCI's, they effectively measure the current flowing in and the current flowing out on the two "hot" wires, and if these do not cancel each other out, then the GFCI will trip. This is because if current in does not equal current out, then some current must be flowing out a different way (to ground!).

Related Questions

What is a asymmetrical Fault?

An asymmetrical fault is a type of power system fault that results in an imbalance of currents and voltages in the system. This imbalance can cause different magnitudes and phases of currents flowing through the system components, leading to potential equipment damage and system instability. Asymmetrical faults are typically caused by line-to-line or line-to-ground faults.


If congress can override the president by two-third what is this system called?

It is not a system, it is a power, which can be found in a democratic, oligarchic, or aristocratic system. The power is called Veto power, or simply "the veto


What types of faults may occur in the wiring system of a loft space of a building?

In the wiring system of a loft space, common faults may include loose connections, which can lead to intermittent power issues or arcing; insulation damage, which can increase the risk of short circuits or electrical fires; and overloaded circuits, resulting from too many devices drawing power from a single circuit. Additionally, moisture ingress can cause corrosion and deterioration of wiring, posing further safety hazards. Regular inspections are essential to identify and rectify these faults.


What is the name of the power connector commonly found on an ATX system?

P1


Can i have a view of the power circuit of an AC generator?

please how can i diagnose faults on an AC generator power circuits?


What is difference between in digital and Numerical Relay?

They seem to be the same thing. Such a device is a protective relay. It uses a microprocessor to analyze power system voltages, currents or other process quantities for the purpose of detecting faults in an industrial process system.


Why are symmetrical faults more severe than unsymmetrical faults?

In power engineering, specifically three-phase power, a symmetric, symmetrical or balanced fault is a fault which affects each of the three-phases equally.In power engineering, specifically three phase power, an asymmetricor unbalanced fault is a fault which does not affect each of the three phases equally.for these reasons thus symmetrical faults are more severe than the former. In power engineering, specifically three-phase power, a symmetric, symmetrical or balanced fault is a fault which affects each of the three-phases equally.In power engineering, specifically three phase power, an asymmetricor unbalanced fault is a fault which does not affect each of the three phases equally.for these reasons thus symmetrical faults are more severe than the former.


What are the sources of Power line disturbance?

Some common sources of power line disturbance include lightning strikes, switching operations, and electromagnetic interference from nearby sources such as radio transmitters, solar flares, and power system faults. These disturbances can lead to disruptions in power quality and reliability for electrical systems.


Are Turtles found on the English coast?

If not, something is severely wrong with this country. TURTLE POWER


What happens if power steering fluid gets into engine?

You could get an oil change as soon as possible to flush the system.


What causes a brownout?

There are many causes of power failures in an electricity network. Examples of these causes include, faults at power stations, damage to power lines, substations or other parts of the distribution system, a short circuit, or the overloading of electricity mains.


What can cause an electrical supply system to go down?

Electriciy can down for a variety of reasons, a vehicle can knock over a power pole, a storm can drop a tree branch on a power line, a transformer can blow if old, or even excessive power usage in a neighbourhood can blow the local tranformer out.