0
The resistance of a copper conductor will decrease with an increase of applied voltage?
Wiki User
∙ 15y ago
No, the resistance of a copper conductor does not vary according to applied voltage. It is constant for a given wire size, and only varies with temperature. Of course, current through a conductor causes it to heat, so current, not voltage, indirectlycauses a change in resistance.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How does electrical resistance change the current in a circuit?
Electrical resistance is opposition to electric current flow. There is a resistance to the flow of current. And a "balance" between applied voltage and resistance determines how much current will flow in a circuit. For a given applied voltage, if we increase the resistance, the current flow will decrease. For that same applied voltage, if we decrease the resistance, the current flow will increase. It's a simple relationship, and it is set down by the following expression: E = I x R We can also write it as I = E / R and R = E / I Voltage (in volts) is E, current (in amps) is I, and resistance (in ohms) is R. In the first expression, voltage is equal to current times resistance. For a constant voltage, any increase in resistance will cause a decrease in current flow. And any decrease in resistance will cause in increase in current flow. Just as cited earlier.
When electric current is following in a curcuit if the voltage applied to the curcuit is increased the resistance will decrease true or false?
true
If the voltage applied to a circuit remains constant and the resistance in the circuit is increased the current will?
V = IR Where, V = voltage I = current R = resistance Thus if resistance is increased with constant voltage current will decrease
Why does higher applied voltage with the same resistance results in more current?
Ohm's law: Voltage = Amperes times Resistance. This means that increasing voltage while keeping resistance the same must result in an increase of current.
What is the effect of temperature on ohms law?
AnswerOne of the conditions for Ohm's Law to apply is that the temperature of a conductor MUST remain constant. And, unfortunately, this is difficult to achieve because as the applied voltage increases, the resulting current causes the temperature of the conductor to rise -thus negating Ohm's Law!!For Ohm's Law to apply, the ratio of voltage to current must remain constant for variations in voltage. If it doesn't, then the conductor/device is NOT obeying Ohm's Law. Period! So if, for example, you increase the voltage across a lamp, you will find that the ratio varies as the voltage increases, and this is because the resistance is increasing due to an increase in temperature. So, in this example, the temperature is the reason why lamps don't obey Ohm's Law.
Will the resistance of a copper conductor decrease with an increase in the applied voltage?
If all environmental conditions remain constant then the resistance will not change appreciably with applied voltage, but the current will increase. An increase in current will raise the temperature of the conductor which will increase the resistance somewhat.
Will an increase of applied voltage decrease the resistance of a copper conductor?
No, the resistance is fixed by the cross section and length of the conductor and does not vary with voltage.
Resistance of a copper conductor will decrease with an increase of applied voltage?
Resistance is affected by the length, cross-sectional area, and resistivity of the conductor. The resistivity, in turn, is affected by temperature. So only by changing one of these four factors will the resistance of a conductor change. Changing voltage will have no affect upon the conductor's resistance.
Does increasing potential difference increase resistance?
Resistance is due to a property specific resistance of material. In no way resistance depends on the voltage applied. This is the case of ordinary conductor. But in case of semi conductor or insulator there may be chances to get a variation of conductance and hence resistance due to potential applied.
When a larger voltage is applied to a conductor does the current increase or decrease?
If you increase the voltage applied to a conductor, the current increases.That is, unless you are talking about stepping up the voltage with a transformer with the intent of distributing it over a long distance to a remote transformer, at which point you would step it back down. In this case, the current would decrease. The above answer to the original question remains valid, however, due to lack of information.
How does electrical resistance change the current in a circuit?
Electrical resistance is opposition to electric current flow. There is a resistance to the flow of current. And a "balance" between applied voltage and resistance determines how much current will flow in a circuit. For a given applied voltage, if we increase the resistance, the current flow will decrease. For that same applied voltage, if we decrease the resistance, the current flow will increase. It's a simple relationship, and it is set down by the following expression: E = I x R We can also write it as I = E / R and R = E / I Voltage (in volts) is E, current (in amps) is I, and resistance (in ohms) is R. In the first expression, voltage is equal to current times resistance. For a constant voltage, any increase in resistance will cause a decrease in current flow. And any decrease in resistance will cause in increase in current flow. Just as cited earlier.
Does an inclined plane decrease the applied force and increase the distance over which the force is applied?
Yes, your right.
If power is constant increasing the voltage will increase or decrease current?
Decrease, because W = I (current) x V (voltage), if one increases, the other decreases in proportion to the increase of the other. Ohm's Law states current is directly proportional to the applied voltage and inversely proportional to the resistance of the circuit.
Who is Greg Ohm?
he's a German physicist proposed ohm's law saying current in a conductor is proportional to the applied voltage divided by its resistance. such that resistance is constant.
will the shopping cart acceleration increase decrease or stay the same?
That depends on the force applied.
What is the ohm?
The Ohm is a unit of measure of resistance to the flow of electricity. The ohm is defined as a resistance between two points of a conductor when a constant potential difference of 1 volt, applied to these points, produces in the conductor a current of 1 ampere.
How forces affects motion?
If force is applied in the line of motion, then motion will increase, but when it is applied opposite to the line of motion, then motion will decrease.
