0
You can work this out yourself. For a sinusoidal waveform the rms value is 0.707 times the peak value. As you quote a peak-to-peak value, this must be halved, first. Incidentally, the symbol for volt is 'V', not 'v'.
Wiki User
∙ 12y ago
Deepak Lodhi
Add your answer:
Earn +20 pts
A sine wave with an RMS value of 100 v would have a peak value of?
For a sine wave ONLY - and assuming you are talking plus and minus 100V (200V peak to peak) - the RMS voltage is about 71V. (One half square root of 2 * single sided peak value)
What is Vrms of half wave rectifier?
RMS means root mean square of a sinusoidal wave form and the number that describe it is .741 of the peak average is ,639 of the peak
If a sine wave has a peak-to-peak current value of 10 Awhat is its rms value?
The root-mean-square (rms) value of a sinusoidal voltage or current is given by: Vrms = 0.707 Vmax and Irms = 0.707 ImaxSo, if the current has a peak-to-peak value of 10 A, then Imax will be half that value (5 A) , so the corresponding rms value is:Irms = 0.707 Imax = 0.707 x 5 = 3.54 A(Answer)
How do you calculate the peak-to-peak value of a sine wave?
All AC voltages and currents are quoted as root-mean-square (rms) values where, for a sinusoidal waveform, the rms value is 0.707 Vmax or 0.707 Imax.From this, you can determine the value of the amplitude Vmax or Imax:Vmax = Vrms/0.707 or Imax = Irms/0.707Once you know the value of the amplitude (Vmax or Imax), simply double it to determine the peak-to-peak value.
Obtain a square wave from sine wave from Zener diodes?
You can obtain a square wave from using two zener diodes which have a threshold significantly under the sinusoidal signal. For example: An input sinusoidal signal at 50V with two 10V zener diodes, the first in foward bias and the second in reverse bias. The output voltage will have a square wave form with 20V peak to peak.
A sine wave with an RMS value of 100 v would have a peak value of?
For a sine wave ONLY - and assuming you are talking plus and minus 100V (200V peak to peak) - the RMS voltage is about 71V. (One half square root of 2 * single sided peak value)
What is Vrms of half wave rectifier?
RMS means root mean square of a sinusoidal wave form and the number that describe it is .741 of the peak average is ,639 of the peak
The rms value of the resultant current in a wire which carries a DC of 20A and a sinusoidal ac of peak value 20A is?
From your description, this sounds like it is a sine wave offset to 10A, so the peak is at 20A, and the min is at 0? For this case, you have 10A DC (RMS) wave and a 10A Peak - neutral AC wave; The RMS value of the AC wave is: 10/2*sqrt(2) = 3.54A. So the RMS amplitude of this wave is 13.54A.
The rms value of the resultant current in a wire which carries a DC of 10A and a sinusoidal ac of peak value 20A is?
From your description, this sounds like it is a sine wave offset to 10A, so the peak is at 20A, and the min is at 0? For this case, you have 10A DC (RMS) wave and a 10A Peak - neutral AC wave; The RMS value of the AC wave is: 10/2*sqrt(2) = 3.54A. So the RMS amplitude of this wave is 13.54A.
If a sine wave has a peak-to-peak current value of 10 Awhat is its rms value?
The root-mean-square (rms) value of a sinusoidal voltage or current is given by: Vrms = 0.707 Vmax and Irms = 0.707 ImaxSo, if the current has a peak-to-peak value of 10 A, then Imax will be half that value (5 A) , so the corresponding rms value is:Irms = 0.707 Imax = 0.707 x 5 = 3.54 A(Answer)
How do you calculate the peak-to-peak value of a sine wave?
All AC voltages and currents are quoted as root-mean-square (rms) values where, for a sinusoidal waveform, the rms value is 0.707 Vmax or 0.707 Imax.From this, you can determine the value of the amplitude Vmax or Imax:Vmax = Vrms/0.707 or Imax = Irms/0.707Once you know the value of the amplitude (Vmax or Imax), simply double it to determine the peak-to-peak value.
Obtain a square wave from sine wave from Zener diodes?
You can obtain a square wave from using two zener diodes which have a threshold significantly under the sinusoidal signal. For example: An input sinusoidal signal at 50V with two 10V zener diodes, the first in foward bias and the second in reverse bias. The output voltage will have a square wave form with 20V peak to peak.
Why carrier signal are sinusoidal?
It does not have to be. Voltage can be DC, sinusoidal, square wave, triangular wave, etc.
What is the peak value of a sine wave that has a peak to peak value of 60v?
30 volts provided zero crossing is at midpoint.
Which has a higher RMS value given a sine wave a square wave and a sawtooth wave?
A square wave has the highest RMS value. RMS value is simply root-mean-square, and since the square wave spends all of its time at one or the other peak value, then the RMS value is simply the peak value. If you want to quantify the RMS value of other waveforms, then you need to take the RMS of a series of equally spaced samples. You can use calculus to do this, or, for certain waveforms, you can use Cartwright, Kenneth V. 2007. In summary, the RMS value of a square wave of peak value a is a; the RMS value of a sine wave of peak value a is a divided by square root of 2; and the RMS value of a sawtooth wave of peak value a is a divided by cube root of 3; so, in order of decreasing RMS value, you have the square wave, the sine wave, and the sawtooth wave. For more information, please see the Related Link below.
For same peak value of current which waveform will have least RMS value?
A square wave will have the highest value since it has a peak, positive or negative, all of the time. Other wave shapes such as triangular and sine, have a lower value than this.
Which wave is highest RMS value peakvalue being the same?
The wave with the maximum RMS value, in comparision with the peak value, is the square wave.
