overshoot and stability
A: DEFINITELY NOT Open loop is defined as no feedback. any kind of negative feedback will reduce the gain
An open loop traffic signal just cycles on a schedule and has no "knowledge" of traffic patterns or current traffic. A closed loop system would have sensors letting it know when traffic was present and a controller that would make decisions based on the traffic conditions.
A Closed loop system basically will have a feedback which enables the rectification of the error in the main process,whereas it is not possible in an open loop system
closed loop system
A cruise control is an example of a closed loop servo.
loop checking is perform before cable termination..the difference between a close loop and open loop is,tha close loop has a feedback while the open loop has not.
it is when a control loop is open and processing
The sensitivity of an open loop control system is always 1, it is due to no feedback involved in open loop.
The system without feedback is known as open loop system. The examples of the open loop system are bread toaster, oven ,washing machine. The open loop systems are inaccurate & less complex.
The open loop system is simple and economicaleasier to constructstable
many problems, could be injectors stuck open, o2 sensor is not connected properly, and all sorts of other electric problems that could keep the car in open loop.
In a closed loop system the gain without the feed back loop being closed is called open loop gain!!! e.g if forward gain is "A" and feed back factor is "B" then open loop gain is "AB" and closed loop gain will be [A/(A+B)]
Closed
A: By definition there is no control on a system in an open loop situation. simply . it has no feedback
Distortion is estimated as closed loop gain divided by open loop gain. If the open loop gain approaches infinity, distortion approaches zero.
no.
tumhari ma ki chut