46 amps
For 3-core twin and earth cables up to 4 sq mm with reasonable air circulation, allow 8 amps per sq mm for copper and 5 amps per sq mm for aluminium. For permanent installations with high usage per day, use 4 amps per sq mm.
heart beating?
Without knowing the resistance present or the power being consumed, it is not possible to determine how volts are present in a circuit with 63 amps. Ohm's Law: Voltage = Current times Resistance Volt: Joules per CoulombAmpere: Coulombs per SecondWatt: Joules per Second
30 amps is how much a 10-2 wire will carry at 110 feet. 10 gauge wire is only good for thirty amps per the national electrical code. Using 80% of the breakers usage you will actually be getting only 24 amps.
400 milli amps total.
No, amps is a unit of electric current. An analogy in fluids would be gallons per minute or cubic meters per second. PSI (Pounds-force per square inch in fluids) would be analogous to Volts. Another term for Voltage is Electromotive Force (EMF)
400 meters per minute is about 1/4 mile per minute.
Cubic feet per minute x 28.3168 = liters per minute
96 gallons per minute = about 363.4 liters per minute.
Multiply liters per minute by 0.0353146667 to get cubic feet per minute.
24.72 cubic feet per minute at 700 liters per minute.
Multiply meters per minute by 3.28 to get feet per minute.
25 litres per minute equates to 0.025 cubic metres per minute.
2,460.52 litres per minute.
Divide the litres per minute by 4.55
One cubic foot per minute = 7.481 US gallons per minute.