The current of the earth fault.
is appox 1.7amp please verify this with book concepts of physics by h.c. verma
because i read it few year back and at present i don't have that book
A current that flows from phase conductors to earth or protective conductors etc from the point of an insulation breakdown.
Earth fault relay and an over current relay Methods to energies an earth fault relay with simulation diagram?
There is such a thing as a three phase to earth fault, so maybe this is what you mean by a "balanced earth fault". I don't believe any earth or ground currents would flow in this case. A restricted earth fault is a typical phase to earth fault, where the zone of protection is restricted to a specific area, such as around a transformer. "Restricted" is referring to the protection method, not what is actually going on with the currents and voltages.
Transmission circuits are prone to earth faults.Only star connection permits flow of earth fault current and the operation of earth fault relays.
Sensitive Earth Fault protection is required to either to alarm or trip the faulted circuit. It is usually used for resistance grounded or ungrounded systems; where first earth fault doesn't interrupt supply. It is also used on long overhead lines (even solidly grounded systems) where earth fault currents can be significantly low.
Restricted earth fault protection is used to protect a specific zone, and should not trip for a fault outside of that zone (usually limited to a transformer, and possibly extending to lowside, highside, and tertiary breakers).
An earth fault relay is a relay that is activated by a fault current that flows from the power line to the earth. Earth fault relays are found in power distribution systems.
Earth fault relay and an over current relay Methods to energies an earth fault relay with simulation diagram?
Yes a fault is a crack in the Earth's crust
transformer max earth fault current
As per my openion standby earth fault relay work on zero impedance measurement, when earth fault occures than zero
There is such a thing as a three phase to earth fault, so maybe this is what you mean by a "balanced earth fault". I don't believe any earth or ground currents would flow in this case. A restricted earth fault is a typical phase to earth fault, where the zone of protection is restricted to a specific area, such as around a transformer. "Restricted" is referring to the protection method, not what is actually going on with the currents and voltages.
A break in the Earth's surface might be called a chasm, a fissure, or a fault line.
reverse fault, strike slip fault, and normal fault
You can't have a three phase earth fault, you can have a phase to phase or a phase to earth fault. If you want the potential phase to earth fault current it will be your voltage times your impedance. If you want the phase to phase potential fault current then you should just double the above result.
That sounds like you are looking for the word "fault" or "fault line".
Fault
earth fault relay is similar like earth leakage ralay,but the 2nd one is more sensitiv.