0
silicon diode is preferred more when compared with germanium diode because in silicon diode the operating voltage is 0.7v where as in germanium diode the operating voltage is 0.3v , germanium is temperature sensitive so it can be easily destroyed by increasing temperature hence silicon diode is preferred more
What else can I help you with?
Why Si is used than Ge in semiconductor diode?
silicon diodes Cut in voltage is 0.7 V.but the Germanium cut in voltage is 0.3 V that's why .............
What is meant by cut off voltage in diode?
Cutoff voltage is the point at which the battery is fully discharged. This is usually the point at which the device will shut itself off.
Will GE breakers fit a Murray panel?
No, they will not work. Use only Murray breakers for safety.
What is cut in or knee voltage of Si and Ge?
For Si it is 0.6or 0.7 and for Ge 0.3 or 0.2.Both values correct for both si and ge
Does a GE AQ panel accept twin type breakers?
Yes, a GE AQ panel accepts twin-type breakers, which are designed to fit in a standard single-slot space while providing two circuit connections. This allows for efficient use of panel space and can accommodate more circuits within the same panel. However, it's essential to ensure that the breakers used are compatible with the specific GE AQ panel model and adhere to local electrical codes. Always consult the panel's documentation or a licensed electrician for proper installation.
What are the difference between Ge and Si diode?
the energy required to break covalent bond in si is 1.1ev and in ge is 0.7ev
Mention cut-in-voltage for Si and Ge diode?
0.6-0.7 V for Si at room temp. and 0.3 for Ge at room temp.
Reverse saturation current of Ge diode?
Reverse saturation current of germanium diodeThe current that exists under reverse bias conditions is called the reverse saturation current. Reverse saturation current of the germanium diode is typically 1 micro ampere or 10-6 a.At a fixed temperature, the reverse saturation current of a diode increases with increase in applied reverse bias. In reverse bias region the reverse saturation current also varies with the temperature.
Why you use si more than ge as semi conductor?
Si can be fabricated into ICs inexpensively, Ge cannot.Si maximum junction operating temperature is 150C, Ge is only 70C.Si is as cheap and plentiful as sand, Ge is more expensive and rarer.etc.
What is value of dynamic resistance oe p-n junction diode?
Rd= Vt*c/I Vt=KT/q, K=Boltzmann constant C= constant 2 for si 1 for Ge I current through the diode
Why Si is used than Ge in semiconductor diode?
silicon diodes Cut in voltage is 0.7 V.but the Germanium cut in voltage is 0.3 V that's why .............
How do you ask a friend how old he is in french a kid?
quel âge as-tu (quite correct)quel âge tu as (not grammatically perfect but much more in use)
Does GE make any commercial ovens?
All of GE's ovens are meant for household use, but they can be used commercially as well. However, they are not traditional commercial ovens like a Viking or Thermador. A GE would be a more affordable option though.
where can i find ge secuirty products for cheap prices?
You can find cheap ge security products at www.ebay.com or www.amazon.com. And you can use your swagbucks to buy everythign which will save you even more money
Is it dangerous to use a GE stove when the f2 code is on?
is it dangerouo to use a ge model gsp26bodiwh stove when the F2 code i on
What is the Difference between Si and Ge diodes?
The significant operational difference between a Si diode and a Ge diode is that Si diodes have a knee voltage of 0.7V needed to allow current flow and Ge diodes have an operational voltage of 0.3V to allow current flow.
Where can you find more information about GE Card?
There are a few good websites where you can find more information about the GE credit line card. The best website to look at is the GE Credit Line website.
