Imagine a tuned cavity i.e. a bell. When it is struck, it provides a sound wave of fixed frequency. If it is struck several times a second, it provides the same frequency at a much higher volume. The striking of the bell is known as the pulse repetition frequency (PRF) and it is this that dictates the power output of a magnetron. The dimensions of the cavities govern the output frequency. Instead of striking a magnetron, it is pulsed across its anode and cathode by a high DC voltage. This is the energy input that equates to the striking of the bell. The gap between the cathode and anode is a vacuum. Electrons being emitted by the heated cathode each time it is pulsed or 'struck' transfer the energy to the cavities. These electrons bunch in reaction to the tuned frequency of the cavities, forming spokes circulating the cathode. Eventually, the electrons strike the anode and cause the cavities to 'ring' at the tuned frequency. One of the cavities has a loop that extracts the energy into a coax/waveguide.
The principles of operation of the automatic voltage regulator is that of the excitation system. The working principle is to regulate the flow of reinforcement on the exciter.
They usually respond to airborne volatile chemicals, which are typical around explosives.
Because the operation of the transistor is determined by the current at the base. the principle equations of BJT operation are: Ic = h*Ib ,and Ie=Ib+Ic thus device operation is controlled by the input current.
they are to convert power into jeremy osborne, which in turn creates an aneesh karan
Gang capacitors are a series of capacitors that are mounted to a common location. When they are mounted in series, they can be controlled by a single switch instead of multiple ones.
because pie mode has maximum of its output efficent and is mostly used mode in the case of magnetron
principle refers to the basic objective of something. Operation refers to how it operates.
A magnetron operates by using a magnetic field to control the movement of electrons emitted from a heated cathode. When these electrons are influenced by the magnetic field, they spiral outward and interact with a series of resonant cavities, generating microwave radiation through the oscillation of the electrons. This microwave energy is then extracted and directed for various applications, such as in microwave ovens or radar systems. The design allows for efficient conversion of electrical energy into microwave energy.
To replace the magnetron on a GE JVM1870SK microwave, first, ensure the appliance is unplugged to avoid electrical hazards. Remove the outer casing by unscrewing the necessary screws, then disconnect any wiring connected to the magnetron. Carefully unscrew the magnetron from its mounting and replace it with a new one, reattaching the wiring and securing it in place. Finally, reassemble the microwave's outer casing and plug it back in to test the operation.
It can be. The magnetron tube inside gives off heat as a result of its operation, so that heat has to go somewhere.
Bernoulli's principle. The above answer is wrong. Its Pascal's Principle :)
Give a brief idea of principle of hysteresis motor,application.
A magnetron is typically made out of a vacuum tube with a cathode, anode, and resonant cavities. It also contains a magnet to generate a magnetic field that helps in the operation of the device. Materials commonly used in its construction include metal, ceramic, and insulating materials to maintain a vacuum.
Dialyisis
the metal thing??
To test a magnetron in a microwave oven, you can use a multimeter set to the resistance or continuity function. Disconnect the magnetron from the oven and touch the multimeter probes to the terminals on the magnetron. If there is no continuity or the resistance reading is significantly different from the specified range, the magnetron may be faulty.
The principle of operation of any known sonic sensor (the human ear, for example) is detection of air vibration by measurement of its sensitive membrane oscillation frequency.