0
In Race round condition gate operation delay by signal but gate oprate first with clock ,this condition called the race raund confident
Wiki User
∙ 8y ago
Add your answer:
Earn +20 pts
How can master slave flip flop prevent race around condition?
RACE AROUND CONDITION OCCURS WHWN BOTH THE INPUT ARE HIGHAND THE OUTPUT THUS UNDERGOES A TRANSITION STATE.FOR EXAMPLE CONSIDER THE INPUT VALUES IN A JK FLIP FLOP;ie;J=K=1 ,THE OUTPUT Q0=0 IN NORMAL CASE WILL CHANGE TO 1 AND VICE VERSA. THE REMEDY FOR RACE AROUND PROBLEM CAN BE ELIMINATED BY USING A MASTER SLAVE J-K FLIP FLOP'S
What is race condition in flip-flops?
A race condition occurs when the output of a logic circuit is fed back into the input in such a way as to change the output, such that settling of the inputs delays the final stabilization of the outputs. It can also occur when two inputs to a circuit change at the same relative time, but the result depends on time sequence, such as in a D-FlipFlop where the clock is edge triggered.. In a full adder, for instance, propogation of carries can delay the final output, resulting in performance (speed) degradation. That is why many full adders have look-ahead carry logic. In essence, to avoid a race condition, you want to design the circuit so that propagation delay does not accumulate in series. A striking example in my memory was where an 8085 microprocessor system used WR/ to drive the databus drivers, while at the same time using WR/ to strobe the destination latches. That was a race condition, and it made the final contents of the latches indeterminant.
Jk master slave flip flop?
consists of two r-s flip-flops wherein clock of the first is negated and applied to the second.it is used to avoid the problem of race-around condition by making sure that the first flip-flop is triggered during the positive going edge and the second during the negative edge of the clock pulse.
What is staggering of transformer?
to avoid the high reluctance. joint are eliminated in the layers (butt joints)
What if you have a negative kvar reading?
A negative KVAR reading can be eliminated by adding an inductor to the circuit.
What is the race around condition?
No
Who got eliminated from amazing race 14?
who got eliminated from amazing race October 17th
When was Tatianna eliminated from Rupaul's Drag Race?
Tatianna was eliminated in episode 9 of season 2 of RuPaul's Drag Race. She was eliminated after losing the LSFYL to Jujubee.
How can master slave flip flop prevent race around condition?
RACE AROUND CONDITION OCCURS WHWN BOTH THE INPUT ARE HIGHAND THE OUTPUT THUS UNDERGOES A TRANSITION STATE.FOR EXAMPLE CONSIDER THE INPUT VALUES IN A JK FLIP FLOP;ie;J=K=1 ,THE OUTPUT Q0=0 IN NORMAL CASE WILL CHANGE TO 1 AND VICE VERSA. THE REMEDY FOR RACE AROUND PROBLEM CAN BE ELIMINATED BY USING A MASTER SLAVE J-K FLIP FLOP'S
Who was eliminated in The Amazing Race season 12 leg 3?
Marianna & Julia were eliminated in leg 3 of The Amazing Race.
Who was eliminated in leg 6 of season 5 of The Amazing Race?
Marshall & Lance were eliminated in leg 6 of The Amazing Race, season 5.
What is race around condition?
The "Race Around Condition" occurs when J+K=1 i.e. When the FF is in the toggle mode.the race around condition in JK latch can be avoided by:a) Using the edge triggered JK flip flop.b) Using the master slave JK flip flop.
Who was eliminated in leg 4 of season 5 of The Amazing Race?
Bob & Joyce were eliminated in leg 4 of The Amazing Race, season 5.
Who was eliminated in leg 1 of season 5 of The Amazing Race?
Dennise & Erika were the first team to be eliminated in season 5 of The Amazing Race.
Who was eliminated in leg 2 of season 5 of The Amazing Race?
Alison & Donny were eliminated in leg 2 of The Amazing Race, season 5.
Who was eliminated in The Amazing Race season 12 leg 2?
Kate & Pat were eliminated in leg 2 of season 10 of The Amazing Race.
Who was eliminated in leg 3 of season 19 of The Amazing Race?
Kaylani & Lisa were eliminated.
