Cable size is determined by current. You did not provide the current, nor did you include the voltage so that we could calculate the current. Please restate the question, and include either the current or the voltage.
A 10 mm cable is most commonly used for a 500 KVA transformer, 240 volt, 3 phrase. The size of the wire that is used in a transformer is based on the voltage.
1- residual flux existing before enegizing the transformer . 2- size of transformer . 3- size of power system. 4- type of magnetic material of the core. 5- the method of energizing the transformer.
The size of grounding wire is based on the amperage output of the transformer. The voltage of the transformer needs to be stated. Without this voltage a calculation can not be made. Amps = Watts/Volts = 30000/?.
4cx95mm aws which size of cable gland
The size of a cable needed for 3.5KW shower can range from 4.0mm.
A 10 mm cable is most commonly used for a 500 KVA transformer, 240 volt, 3 phrase. The size of the wire that is used in a transformer is based on the voltage.
The Transformer rating should be well above the total running load of the house
Yes
500w iron core transformer .that kind of size
Please define "2 nos".
The TRANSFORMER PROTECTOR is a transformerexplosion and fire prevention system suitable for any type of oil-immersed transformer and including surrounding equipment such as the On Load Tap Changer (OLTC), Oil Cable Box (OCB), and Oil Bushing Cable Box (OBCB).
The main supply will first come from the power company to a transformer to reduce the voltage then from the transformer to the weatherhead then through the house meter to the main disconnect on the outside of building then to the switchgears main. The cable coming from the transformer to the meter and to the top of the main disconnect is the Main service cable
3r x 300sq.mm Al. ar UG cable <<>> Wiring is sized by the amperage that is used by the load. The formula for amps is I = W/E. Amps = Watts (or VA)/Volts. As you can see an answer can not be given unless a voltage is stated. The lower the primary voltage the larger the amperage will be and likewise the larger the wire size will be.
1- residual flux existing before enegizing the transformer . 2- size of transformer . 3- size of power system. 4- type of magnetic material of the core. 5- the method of energizing the transformer.
Primary : 4 Secondary : 3/0 <<>> To answer this question correctly a voltage must be stated.
To answer this question the size of the cable or the amperage of the load is needed to calculate the correct wire size and connectors to fit the cable.
This terminology usually refers to pad mounted transformers. A "radial feed " transformer is a transformer that has one bushing for the high voltage cable line. The high voltage cable terminates into the transformer through the transformer's bushing. There is no second bushing for the high voltage cable to continue further down the line. This type of transformer is usually on the end of a loop feed circuit. This is different from a "loop feed" transformer whose incoming cables are terminated at the primary bushings. On this type of transformer there is a second bushing which connects to the outgoing primary voltage cables that allows the primary to feed another transformer. Each pad mount transformer's secondary feed usually supplies enough power to connect up to four homes.