The difference between 1 second and 3 seconds is 2 seconds. In terms of short-circuit withstand capacity, it can mean the difference between no damage and damage occurring to the equipment and wiring. Heat rises extremely fast in a short-circuit situation, and you want your protective device to trip before damage is done.
the time it duration for the action and voltage drop
a dynamic load is one that varies with time, sucha sproduced in road trandsportation. It could be amplified at resonance. An impact load is a dynamic load opf short duration, such as dropping a rock onto a surface, resulting in possible high acceleration depending on the stiffness.
A: It is a pulse of any duration designed to trigger an event i logic design
4ms
Lightning is the occurrence of a natural electrical discharge of a very short duration and a very high voltage between a cloud and the ground.
Capacity of sensory is vast quantities and duration is limited (up to a few seconds)
The duration of La Difference is 1800.0 seconds.
The duration of Seven Hours Difference is -5400.0 seconds.
Load duration curve represents re-arrangement of all load elements of chronological load curve in the order of descending magnitude. It illustrates the relationship between generating capacity requirements and capacity utilization.The area under the load duration curve and the corresponding chronological load curve is equal and represents total energy delivered by the generation station.
Citrus trees can withstand short periods of light frost, but hard frosts of long duration can be devastating.
The long-term memory stage has the greatest capacity and the longest duration among the three memory stages. It can store vast amounts of information for an extended period, ranging from minutes to a lifetime.
Nothing, they are equivalent.
needs answer to this question
Bromocriptine (dopaminergic agonist drug) has longer duration of action than levodopa (dopamine precursor).
Power frequency volatge is applied for a duration of one minute and as such there would be many cycles of sinusoidal wave form applied during the tets; hence, RMS value is considered. Whereas LI is a surge and is typically 1.20 micro sec. wave; hence peak is considered.
not sure. Please answer
iIDK