current mirror circuit produce more stability as compared to biased circuit.
The difference between a current control device and voltage controlled device is that for current controlled device, the current is constant and the voltage is variable while for a voltage controlled device, the voltage is constant and the current is variable.
V = IR Where, V = voltage I = current R = resistance Thus if resistance is increased with constant voltage current will decrease
The primary difference between a series and a parallel circuit is how many pathways the current has to travel in. Let's look at both of them and see what's up. In a simple series circuit, there is only one path for current. The current must flow through every component in the circuit.
A resistor is a device designed to detect difference in current and stop the flow of electricity. On most every type of electric engine or circuit has a resistor.
A current transformer step downs the current in a power circuit to a lower amperage. A voltage transformer steps down the voltage in a power circuit, typically to 110 volts AC for residential and business use.
As long as the voltage between the ends of the circuit remains constant, the current through the circuit is inversely proportional to the total effective resistance of the circuit.
because of the reactances in the circuit
Current flows in a circuit when there is a difference in electronic potential between two points.
it is the same
If the voltage between the ends of a series circuit changes, the current in thecircuit definitely does not remain constant. The current does change by the samefactor as the voltage.The current at every point in the series circuit is the same current.
The difference between a current control device and voltage controlled device is that for current controlled device, the current is constant and the voltage is variable while for a voltage controlled device, the voltage is constant and the current is variable.
It is halved. coz voltage=current * resistance
Current will increase
At constant temp.& pressure,on the same circuit,with potential difference unchanged,current reduces if resistance increases.(Ohm's law).
A: In a series circuit the current remains the same In a parallel circuit the current may divide to satisfy the branches of the loads,
That is called electrical current.
V = IR Where, V = voltage I = current R = resistance Thus if resistance is increased with constant voltage current will decrease