Look up Ohm's law. Should help
Use the general equation for resistance in parallel: 1/R = 1/R1 + 1/R2
The equation you are looking for is R = E/I. The question wants to see if you know how to convert mA to amps. Do the conversion and then use the equation and you will have your answer.
They are proportional to each other with a constant of 1/V, by rearrangment of the formula V = IR.
The equation you are looking for, R = E/I, is derived from the definition of the ohm, not from Ohm's Law. Ohm's Law is properly-called 'Ohm's Law of Constant Proportionality', which states that, for certain (linear) loads, the ratio of voltage to current is constant for changes in voltage. The above equation applies whether Ohm's Law does or does not.
If two 1-ohm resistors are connected in parallel, their resistance is 0.5 ohms. If they are connected in series, their resistance is 2 ohms. It is not possible to connect only two resistors in series parallel.
Use the general equation for resistance in parallel: 1/R = 1/R1 + 1/R2
R = 1/[1/2 + 1/4 + 1/6 + 1/10] Add up the reciprocals of the resistances, and take the reciprocal of the answer.
It is a linear equation in one variable r. The solution to the equation is r = 1.
The equation you are looking for is R = E/I. The question wants to see if you know how to convert mA to amps. Do the conversion and then use the equation and you will have your answer.
If the loads are wired in series, add the three values to get the total R. If they are in parallel then the formula is 1/R = 1/R1 + 1/R2 + 1/R3 The total resistane when resistors are in parallel is ALWAYS LESS than the lowest individual value.
50
They are proportional to each other with a constant of 1/V, by rearrangment of the formula V = IR.
The equation you are looking for, R = E/I, is derived from the definition of the ohm, not from Ohm's Law. Ohm's Law is properly-called 'Ohm's Law of Constant Proportionality', which states that, for certain (linear) loads, the ratio of voltage to current is constant for changes in voltage. The above equation applies whether Ohm's Law does or does not.
Ohm's law relates voltage, current, and resistance. Voltage is current times resistance Current is voltage divided by resistance Resistance is voltage divided by current
Z = SQR (R² + XL²)Where:Z = Impedance (ohm)R = Resistance (ohm)XL= Inductance Reactance (ohm)
Z = SQR (R² + XL²)Where:Z = Impedance (ohm)R = Resistance (ohm)XL= Inductance Reactance (ohm)
If two 1-ohm resistors are connected in parallel, their resistance is 0.5 ohms. If they are connected in series, their resistance is 2 ohms. It is not possible to connect only two resistors in series parallel.