They are proportional to each other with a constant of 1/V, by rearrangment of the formula V = IR.
Load current is related to load resistance by an inverse relationship. The load current increases linearly as load resistance decreases. Remember, the less resistance, the more current.
There is no physical relationship between resistance and capacitive reactance. But if someone tells you that the impedance of something: Z = 3 -4j, the real resistance is 3 and the reactive capacitance is -4.
When voltage and current waveforms are out of synch the power factor is reduced. In a pure resistance load the PF is 1. When inductance and capacitance is involved the PF is from 0 to 1.
In simple MOSFET current mirror, the load current does not follow a linear relationship with reference current (ie for short channel MOSFET's multiplying factor due to channel length modulation cannot be neglected). But by cascoding the output resistance can be increased and since output resistance follows an inverse relationship with lambda (channel-length modulation parameter), the multiplying factor due to channel length modulation reduces to one and a linear relationship is obtained between reference and load current.
Electrical resistance is opposition to electric current flow. There is a resistance to the flow of current. And a "balance" between applied voltage and resistance determines how much current will flow in a circuit. For a given applied voltage, if we increase the resistance, the current flow will decrease. For that same applied voltage, if we decrease the resistance, the current flow will increase. It's a simple relationship, and it is set down by the following expression: E = I x R We can also write it as I = E / R and R = E / I Voltage (in volts) is E, current (in amps) is I, and resistance (in ohms) is R. In the first expression, voltage is equal to current times resistance. For a constant voltage, any increase in resistance will cause a decrease in current flow. And any decrease in resistance will cause in increase in current flow. Just as cited earlier.
In microscopic Ohm's law, the relationship between resistance and current is that resistance is directly proportional to the current flowing through a material. This means that as resistance increases, the current flowing through the material decreases, and vice versa.
because current is the ratio of voltage and resistance.
In a circuit with constant voltage, the relationship between current and resistance is inversely proportional. This means that as resistance increases, the current flowing through the circuit decreases, and vice versa.
Ohm's Law states that the relationship between resistance, current, and voltage is given by the equation V IR, where V is the voltage, I is the current, and R is the resistance. This means that for a given voltage, the current flowing through a circuit is inversely proportional to the resistance - as resistance increases, current decreases, and vice versa.
Ohm's Law: voltage = current * resistance. If resistance is a constant, then voltage is directly proportional to current.
In an electrical circuit, current is the flow of electric charge, voltage is the force that drives the current, and resistance is the opposition to the flow of current. According to Ohm's Law, the relationship between current (I), voltage (V), and resistance (R) is given by the equation V I R, where voltage equals current multiplied by resistance.
This relationship was discovered by Karl Georg Ohm.
The relationship between power (P), current (i), and resistance (r) in an electrical circuit is described by the formula P i2 r. This means that power is directly proportional to the square of the current and the resistance in the circuit.
Ohm's law gives the relationship between current, voltage, and resistance. The law states that I=V/R, where I is current, V is voltage, and R is resistance. Source: university digital fundamentals
Voltage is the product of current times resistance, V=IR, I is Current and R is resistance. ANSWER: It is a simple ratio of 1:1:1
That is called Ohm's Law.
The relationship between resistance and current in an electrical circuit is described by Ohm's Law, which states that the current flowing through a circuit is directly proportional to the voltage applied and inversely proportional to the resistance in the circuit. In simpler terms, as resistance increases, the current flowing through the circuit decreases, and vice versa.