The LM741 series are general purpose operational amplifiers which feature improved performance over industry standards like the LM709. They are direct, plug-in replacements for the 709C, LM201, MC1439 and 748 in most applications. The amplifiers offer many features which make their application nearly foolproof: overload protection on the input and output, no latch-up when the common mode range is exceeded, as well as freedom from oscillations. The LM741C is identical to the LM741/LM741A except that the LM741C has their performance guaranteed over a 0°C to +70°C temperature range, instead of -55°C to +125°C.
general purpose self-stabilized operational amplifier
this is compared to the earlier 709 operational amplifier that needed external stabilization components
When the feedback of the output terminal of an Op-Amp is given to the non-inverting terminal [pin 3 for IC-741] of that Op-Amp , then , that circuit is called non-inverting amplifier using Op-Amp. This circuit is called non-inverting because the output signal of this circuit is in phase with the input signal.
Nobody invented the op-amp but manufactures decided that an amplifier can be more efficient as opposed to building the same amplifier out of discreet components
op amp linear ic 7805 non linear ic
The op amp is an electronic device consisting of a complex arrangement of resistors, transistors, capacitors, and diodes. Here is a link to a 741 Op-Amp design... http://www.play-hookey.com/analog/inside_741.html
Feedback in used in an op-amp to limit and control the gain. An op-amp, by itself, has very high gain, often more than 100,000. (A theoretical op-amp has infinite gain.) The external feedback loop forms a divider, more correctly a bridge, that is maintained in balance by the op-amp, giving the desired real gain.
ic 741
How ic 741 works?
A 741 Op-amp has three distinct parts and applications. They are a differential amplifier, a voltage amplifier, and an output amplifier.
High gain high input impedance low output impedance
An operational amplifier (op-amp) is a high-gain electronic voltage amplifier. The 741 IC type op-amp is a small scale integrated circuit. There is no actual reason for it be called 741, the number is an arbitrary designator assigned simply to make it possible to identify the part and look it up in a databook. The number was originally assigned as a member of the 7xx series of SSI bipolar analog integrated circuits in the middle 1960s, 741 was probably just the next unassigned number available.
When the feedback of the output terminal of an Op-Amp is given to the non-inverting terminal [pin 3 for IC-741] of that Op-Amp , then , that circuit is called non-inverting amplifier using Op-Amp. This circuit is called non-inverting because the output signal of this circuit is in phase with the input signal.
2o
the op amp is a one IC which does not work at hige volteg so the IC not consumed the high frequncy
Nobody invented the op-amp but manufactures decided that an amplifier can be more efficient as opposed to building the same amplifier out of discreet components
op amp linear ic 7805 non linear ic
yes
741 opamp