0
The transistor has three regions, emitter,base and collector. The base is much thinner than the emitter while the collector is wider than both. However for the sake of convenience the emitter and collector are usually shown to be of equal size.
The transistor has two pn junctions that means it is like two diodes. The junction between emitter and base may be called emitter-base diode or simply the emitter diode.The junction between base and collector may be called collector-base diode or simply collector diode.
The emitter diode is always forward biased and the collector diode is always reverse biased.
What else can I help you with?
Is active is a cutoff region of transistor?
The active region of a transistor is when the transistor has sufficient base current to turn the transistor on and for a larger current to flow from emitter to collector. This is the region where the transistor is on and fully operating.
Different between power transistor and transistor that used in small signal?
Power transistor can conduct large amount of currents through it, more than small signal transistor. power transistor has a vertical structure and small signal transistor has horizontal structure.In power transistor quasi saturation region is present which is absent in the small signal transistor. In power transistor there is a inculsion of drift layer which is not there in the small signal transistor. Power dissipation is less in power transistor and it is more in small signal transistor. b.v.polytechnic,vasai pushkar vaity.
Where can you get a c5148 transistor?
2SC5148 C5148 TRANSISTOR Ebay
What is equivalent transistor for c1027?
what is the equivalent transistor for c1027
What is a load line of transistor?
what is load line of transistor what is load line of transistor
What are h parameters of a transistor?
Answerthe h parameter or the hybrid parameters of a transistor helps us to analyse the amplifying action of transistor for small signal .it is necessary for practical purposes.In generally there are four type of h parameter.these are :h11h12h21h22
Why dont we get the transister action by connecting two diodes back to back?
Because two diodes is not a transistor. There is an interaction between the junctions in the transistor, because of their proximity, that you don't get in the two diodes. The only use of modeling a transistor as two diodes back to back is to test a transistor with a multimeter as a quick go-nogo test for basic operability.
What is Si transistor?
A silicon transistor is a transistor made of silicon.
Is active is a cutoff region of transistor?
The active region of a transistor is when the transistor has sufficient base current to turn the transistor on and for a larger current to flow from emitter to collector. This is the region where the transistor is on and fully operating.
What is the purpose of the Unijunction Transistor?
A Unijunction Transistor is a transistor that acts solely as a switch.
What are the Similar transistor for 221334 PNP transistor?
Similar to a 2N3906 PNP transistor
How does a transistor behaviour?
how does a transistor behaviour
What is rt in electronics?
I believe that is resistor transistor technology TTL transistor transistor logic
Different between power transistor and transistor that used in small signal?
Power transistor can conduct large amount of currents through it, more than small signal transistor. power transistor has a vertical structure and small signal transistor has horizontal structure.In power transistor quasi saturation region is present which is absent in the small signal transistor. In power transistor there is a inculsion of drift layer which is not there in the small signal transistor. Power dissipation is less in power transistor and it is more in small signal transistor. b.v.polytechnic,vasai pushkar vaity.
How do you use 'transistor' in a sentence?
I can give you several sentences.I bought a transistor radio.The transistor amplified the signal.We studied the transistor in science class.
Are Tip0ff0401 transistor synonym's to 2N3055 transistor?
no is not !
What is darlington configuaration?
A Darlington pair uses two transistors connected to behave as a single transistor with a very high current gain (beta). Transistor-1 has its collector connected to the collector of transistor-2. Transistor-1 has its emitter connected to the base of transistor-2. The base of transistor-1 with the emitter and collector of transistor-2 is used as a single transistor.
