0
What else can I help you with?
What does the base do in a transistor?
It depends on the transistor, you just have to look at the data sheet for the transistor.
How do you bias a 2N5777 photo-transistor?
connect the base of the transistor to a variable resistor and to a normal resistor
What can the input of a transistor be called?
The input of a transistor is typically referred to as the "gate" in a field-effect transistor (FET) or the "base" in a bipolar junction transistor (BJT). In both cases, the input controls the flow of current through the transistor, allowing it to function as a switch or amplifier in electronic circuits. The gate or base receives the input signal that modulates the transistor's operation.
What is a transistor that is normally on with no applied signal?
The PNP transistors conducts when there is no signal at base (0V or grounded), when base current is increased the conduction of PNP transistor decreases.
What happens when the base current of a transistor is decrease?
in a properly biased transistor, collector and emitter current also decrease
What is power transistor base emitter voltage?
Its is the emiiter base of the transistor voltage!
What are the parts of a transistor?
The emitter, the base, and the collector are parts of a transistor.
What is base width modulation?
As the applied base-collector voltage (VBC) varies, the base-collector depletion region varies in size. This variation causes the gain of the device to change, since the gain is related to the width of the effective base region. This effect is often called the "Early Effect"An NPN bipolar transistor can be considered as two diodes connected anode to anode. In normal operation, the emitter-base junction is forward biased and the base-collector junction is reverse biased. In an npn-type transistor for example, electrons from the emitter wander (or "diffuse") into the base
What is base-width modulation?
As the applied base-collector voltage (VBC) varies, the base-collector depletion region varies in size. This variation causes the gain of the device to change, since the gain is related to the width of the effective base region. This effect is often called the "Early Effect"An NPN bipolar transistor can be considered as two diodes connected anode to anode. In normal operation, the emitter-base junction is forward biased and the base-collector junction is reverse biased. In an npn-type transistor for example, electrons from the emitter wander (or "diffuse") into the base
What does the base do in a transistor?
It depends on the transistor, you just have to look at the data sheet for the transistor.
How is current amplified in a transistor?
Transistor increase the strength of a weak signal from the base
What is darlington configuaration?
A Darlington pair uses two transistors connected to behave as a single transistor with a very high current gain (beta). Transistor-1 has its collector connected to the collector of transistor-2. Transistor-1 has its emitter connected to the base of transistor-2. The base of transistor-1 with the emitter and collector of transistor-2 is used as a single transistor.
Is a diode like a transistor?
No. A diode is not like a transistor, and a transistor is not like (two) diode(s). Taken in isolation, the emitter-base and collector-base junctions of a transistor appear to be diodes, but they are coupled together so that the base-emitter current affects the collector-emitter current.
What element that controls a transistor?
base
Why is the base of transistor made very thin?
Base of transistor is made thin just to get Collector current equal to Emitter current.
Why transistor burns?
If inceres the base voltage of transistor them it may be burn . The base volt may be 0.8v to 1.8 If it use as a amplifier
Is active is a cutoff region of transistor?
The active region of a transistor is when the transistor has sufficient base current to turn the transistor on and for a larger current to flow from emitter to collector. This is the region where the transistor is on and fully operating.
