At the instant of starting
A 2-Pole motor runs twice as fast as a 4-pole motor. The 2-pole motor has 2 windings at 180 degrees apart and the four pole motor has four windings at 90 degrees apart. The rotor tries to move from pole to pole with each half cycle of the AC current so the motor no-load speed for 60 cycle current is 2x3600/#poles. This is 1800 rpm for a 4-cycle motor and 3600 rpm for a 2-pole motor.
480V about 20A 240V about 40A look at the nameplate duty cycle and efficiencies vary
Full load starting current is typically in the region of 5or 6 times the full load motor current;.
Motor starting current is typically 5-7 times the rated current of the motor. (For three phase induction motors)
The induction of a DC motor while rotation lead to a non continuid current. This AC part of the DC csupply current is called ripple current. You can measure this and see if the motor is moving and also you can count the ripple per second and have the motor speed "RMS".
In NSW Australia to ride a motor cycle on a public road you have to have a motor cycle licence.
The motor, being designed to run on either a 50 or a 60 cycle (a.k.a. hertz) system , will turn faster.
A 2-Pole motor runs twice as fast as a 4-pole motor. The 2-pole motor has 2 windings at 180 degrees apart and the four pole motor has four windings at 90 degrees apart. The rotor tries to move from pole to pole with each half cycle of the AC current so the motor no-load speed for 60 cycle current is 2x3600/#poles. This is 1800 rpm for a 4-cycle motor and 3600 rpm for a 2-pole motor.
A motors locked rotor current is the same as the motors starting current. This is the point where the voltage is applied to a non rotating motor, time cycle zero. Because the motor is not rotation and generating a back EMF to oppose the inrush current, the current will go as high as 6 times the running current of the motor.
Motor-Cycle - album - was created in 1968.
Split rings keep the current flowing in the same direction or the motor turning in the same direction when using alternating current which reverses direction in its cycle..
thermal motor protector is temperature; current type is current.
480V about 20A 240V about 40A look at the nameplate duty cycle and efficiencies vary
What supplies a dc motor is not current, but voltage. Current is what flows in the circuit formed by the dc motor and for the charge. That current varies according to the resistance of the circuit.
That would be a mechanic's job.
Bi or Motor?
Full load starting current is typically in the region of 5or 6 times the full load motor current;.