Another 750 mA fuse. 750 mA is equal to .75 amps. The max I would put in is a 1 amp fuse and I would want to replace it soon with the proper one.
It is a fuse that is rated in one thousandths of an amp. An example, a 500 mA fuse can also be called a 1/2 amp fuse.
The charge transferred in 25 minutes by a current of 500 mA is 750 coulombs. Amperes is defined as coulombs per second, so 500 mA is 0.5 coulombs per second. 25 minutes is 1500 seconds, so the charge is 750 coulombs.
Yes. 1500 mA = 1.5 A
Yes a 4 - 20 ma loop can be tested.
mA means milli-amperes VA means Volt-amperes
It is a fuse that is rated in one thousandths of an amp. An example, a 500 mA fuse can also be called a 1/2 amp fuse.
A 200 mA fuse would be appropriate to protect a DC relay with a 170 mA rating. Choose the next higher standard fuse rating to ensure the relay is adequately protected while allowing for any slight variations in current draw.
Yes.
roughly 750 miles
No, a T100L 250V fuse cannot replace a T80mA 250V fuse. The "T" indicates that it is a time-delay (slow-blow) fuse, while the numbers represent the current rating; 100L means 100 mA, and 80mA means the original fuse is rated for a lower current. Using a fuse with a higher current rating can pose a risk of overheating or damage to the circuit, as it may not blow in a fault condition. Always replace fuses with the same specifications to ensure safety and proper functioning.
Yes, you can replace a 630 mA battery with a 900 mA battery, as long as the voltage and physical size are compatible. The 900 mA battery will provide a longer runtime since it has a higher capacity. However, ensure that the device can handle the increased capacity without any issues. Always check the manufacturer's specifications to avoid potential damage.
roughly 750 miles
Not a good idea. T500 is a slow blow. F500 has a faster response characteristic, as in fast blow. You could go the other way around in a pinch if it was an F500 sub'd for a T500 but not the T500 for an F500.
The charge transferred in 25 minutes by a current of 500 mA is 750 coulombs. Amperes is defined as coulombs per second, so 500 mA is 0.5 coulombs per second. 25 minutes is 1500 seconds, so the charge is 750 coulombs.
100 mA
gG FUSES IS FAST ACTING BUT THE mA FUSES ARE TIME DELAY FUSES
The GMA series of fuse is a fast acting glass tube fuse. The dimensions are 5 X 20 mm. This series of fuse's amperage span is from 63 mA right up to 8 amps. I would suggest that your fuse is rated at 250 mA or (1/4 of an amp) with a 250 volt rating.