0
What else can I help you with?
Should grooved wire be connected to white wire?
If you are referring to lamp cord type wire where both wires are brown then yes, connect the wire with the groves to the white neutral and the smooth wire to the black hot wire.
What wire do I connect the 277 VAC wire to?
It depends on what 277 volt device you are trying to connect.
How do I rewire an ungrounded plug?
If there is no ground wire connect the ground wire to the neutral wire.
Can you use 40 amp breaker for your lights and plug ins?
If you are referring to house wiring then the answer is no. A breaker protects the wire size that is connected to the breaker. In home wiring most homes are wired with a #14 wire which is rated at 15 amps. That is why the wire is protected by a 15 amp breaker. The correct wire size to connect to a 40 amp breaker is a #8. This size wire is too large to connect to receptacles an light fixture terminals.
Which side of the White neutral wire do you connect the Black power wire?
The neutral wire and power wire are never connected together.
Can you connect aluminum house wire to a light that has steel wire?
nope.
What type of wire should be used for an air conditioner installation: 10/2 or 10/3 wire?
For an air conditioner installation, 10/2 wire should be used.
Can you connect a 3 wire 120 Volt with ground to a 2 wire House wire has black and white and ground Appliance has black red white and ground?
To answer this question fully the type of appliance has to be stated and its voltage.
You are hooking up a 220v air conditioner you were told to use 10-2 wire how do you hook this up?
10-2 wire refers to 10 gauge, 2 conductor wire. Youshould use wire that is 10 gauge or larger (8 gauge, 6 gauge, 4 gauge, 2 gauge). The larger the wire, the more it will cost. most people install using the smallest size permitted, which in this case is 10 gauge. The are specifying the wire size to ensure that you do not connect the air conditioner to electric power using wire that is two small. If you are having problems with this type of question, you should consult an licensed electrician for help in connecting your air conditioner.
What is the recommended wire size for an air conditioner installation?
The recommended wire size for an air conditioner installation is typically 10-gauge wire.
How do I wire an air conditioner to a furnace?
To wire an air conditioner to a furnace, you will need to connect the thermostat wires from the air conditioner to the corresponding terminals on the furnace control board. Make sure to follow the wiring diagram provided by the manufacturer for proper connections. It is recommended to consult a professional HVAC technician for assistance to ensure the wiring is done correctly and safely.
How do you connect timer white and black house wire with red black and white wires?
House wire is "line" Black & White house goes to Black & White of Timer; the "load" (e.g. Pond Pump, etc.) is connected to the Red & White. Specifically, put all 3 whites together (nut or terminal); House (source)(line) Black to Timer Black; and "load" Black to Timer Red. The Red wire is the "Timed" (switched) hot wire.
How do you connect the wire from the alternator to the starter?
how do you connect the wire from the alternater to the starter?
Can you turn on power to a house without a ground wire?
No. If the service is missing a ground wire the electrical inspector will not pass the installation. With out the inspectors approval the utility company will not connect the house and turn the power on.
Should grooved wire be connected to white wire?
If you are referring to lamp cord type wire where both wires are brown then yes, connect the wire with the groves to the white neutral and the smooth wire to the black hot wire.
Is a cu wire a ground wire?
The type of wire does not generally determine whether something is a ground wire or not. A wire is a ground wire if it is connected to the ground of a circuit, or the common ground (the reference point of a circuit that is at 0 volts). However, in relation to the grounding rod used to connect the main circuit panel for a house, the rods are almost always made of steel that are copper plated.
Is there something portable like a laptop computer that can just be used to type into then connect to the desk top computer to print?
What you can do is that you can just type whatever you want to type in then you can connect your desktop's printer wire into your laptop (if you have one!)
