Resistance will decreases... Because R is inversely proportional to Area of the conductor.
AnswerIf the conductor has a circular cross-sectional area, then doubling the diameter will reduce the resistance to one quarter of its original distance. This is because area is proportional to the square of the radius, and resistance is inversely proportional to cross-sectional area.
resistance is directly proportional to wire length and inversely proportional to wire cross-sectional area. In other words, If the wire length is doubled, the resistance is doubled too. If the wire diameter is doubled, the resistance will reduce to 1/4 of the original resistance.
this is because there will be more collisions between atoms and electrons as there is a greater distance to travel. The longer the length of wire, the more collisions. It is like a traffic jam, the longer the road, the loner you are stuck in it for.
P1 = V I1, Therefore, if P2=0.5*P1, thenI2=0.5*P1/V, or 0.5*I1and if P3=2*P1, thenI3=2*P1/V, or 2*I1In other words, current is proportional to power and inversely proportional to voltage.
The answer depends entirely upon the scenario. Are you dealing with AC or DC? Does your circuit contain passive components or both passive and active components?For example, if you a simply dealing with a resistive DC circuit, you can derive your answer from Ohm's law, V = IR. Rearranging for current, I = V/R, so if you double the voltage, the current is subsequently doubled.
Presumably, you are asking what happens when a conductor 'cuts' lines of magnetic flux? If so, then a voltage is induced across the ends of that conductor.
If the length of the conductor increases while the diameter remains constant, the resistance of the conductor will increase. Resistance is directly proportional to the length of the conductor, so a longer conductor will have higher resistance. The diameter, however, does not directly affect resistance as long as it remains constant.
The diameter of a circle is doubled if the circumference is doubled.
Nothing. Resistivity is a physical characteristic of a material. It's not affected by its shape, etc.
resistance is directly proportional to wire length and inversely proportional to wire cross-sectional area. In other words, If the wire length is doubled, the resistance is doubled too. If the wire diameter is doubled, the resistance will reduce to 1/4 of the original resistance.
The circumference is doubled or tripled, respectively.
The longer the conductor the greater the end to end resistance.
When the diameter is doubled, perhaps? Then the area is 4 x larger.
The volume of the cylinder would be doubled.
If you double the circumference. the diameter like wise would double.
the area is increased by 4 times
It is halved. coz voltage=current * resistance
If the length of the conductor is halved, the resistance of the conductor also decreases by half. This is because resistance is directly proportional to the length of the conductor. Shortening the length leads to fewer collisions between electrons and reduces the overall resistance.