0
What else can I help you with?
Why are some electricity pylons in US made of wood?
Wood is relatively strong, weathers fairly well, is (or was, at least) readily available, and is inexpensive. Utility power generation is, after all, a for-profit business.
What is conduit fitting?
Conduit fitting is used on metal pipes that house electrical wires. These fittings are not only to connect the various pieces together, but to keep a relatively water tight seal to the wires.
Is the earth fault close to neutral end of an wye connected winding very common?
Probably not, because the potential (with respect to earth) of a point on the winding, close to its neutral end, will be relatively low. Accordingly, it is less likely that the insulation will fail -the most common cause of electrical faults.
What is the correct name for BS 7671?
Currently; "BS 7671 Requirements for Electrical Installations. The IEE Wiring Regulations" With the first amendment of the 17th edition of BS 7671 due to be issued in a matter of weeks and the "IEE" being changed to "IET" on the document, what else differs is relatively unknown at present.
When can high voltages be relatively safe?
When the current is very low; static electricity has a very high voltage but little current. On the other hand very high current won't even penetratrate the skin if the voltage is low. It takes both and AC is worse than DC because it can disrupt nerve impulses that control the heart.
What do you use natural gas for?
Natural gas is used for heating and generating electrical energy
Is stain steel a conduncter?
Yes, stainless steel is considered a conductor of electricity. It has a relatively low electrical conductivity compared to metals like copper or aluminum, but it can still conduct electricity.
What is uranium electrical conductivity?
Uranium is a metal with relatively low electrical conductivity compared to other metals. It is considered a poor conductor of electricity due to its crystalline structure and electronic configuration. However, uranium can still conduct electricity to some extent.
What is the electrial conductivity for boron?
Boron is classified as a semiconductor and has relatively low electrical conductivity compared to metals. It is considered a poor conductor of electricity.
Why does a pineapple conduct electricity?
Biological materials, such as this one, will usually conduct electricity due to ions in the liquid. Since an ion has an electrical charge, and is relatively free to move around, it can conduct an electrical current.
Examples of electrical resistance?
The filament in an incandescent light bulb resists the flow of electricity. Copper wire has relatively low electrical resistance, making it a common choice for transmitting electricity. Insulators, such as rubber or plastic, have high electrical resistance, which prevents the flow of electricity.
Why are electrical wires made up of copper?
Most electrical wires are made up of copper instead of any other metal. The reason for this is that copper is such an excellent conductor of electricity and it is relatively inexpensive.
Does copper have a electrical conductivity?
Yes, indeed: one of the highest electrical conductivities of any known substance.
What is the conductivity of halite?
The conductivity of halite, which is also known as rock salt, is relatively low. It is a poor conductor of electricity due to its ionic structure. However, halite can conduct heat relatively well compared to its electrical conductivity.
What is the poorest electrical conductor is it pencil lead glass steel or aluminum?
Pencil lead is the poorest electrical conductor among the materials listed. While steel and glass are poor conductors, aluminum is a relatively good conductor of electricity.
Is alluminium a conductor of electicity?
Yes, aluminum is a good conductor of electricity. It is commonly used in electrical wiring and transmission lines due to its high conductivity and relatively low cost.
Why is coal a relatively cheap means of generating power?
coal is very cheap in stores
