Because to much electricity is getting through to the light bulb.
No, it will cause the bulb to blow. A 12 volt light is DC voltage and your home outlet is AC voltage.
Off hand no but your explanations are not clear as to who is doing what to whom,,
the zero bulb required less amount of electricty to glow the voltage of bulb is below 5 volt
When you want to use a MH bulb in an HPS ballast you must use a conversion bulb. It must be the same wattage as the HPS bulb
Thomas Jefferson did not invent the light bulb. The light bulb was invented by Thomas Edison in 1879 in New Jersey.
No, a light bulb cannot blow out if it is turned off. Blown light bulbs occur when they are turned on due to the filament burning out or electrical issues.
Because the fuse acts as a surge protector.
Nothing much will happen except the same bulb will not blow..
Because when a light bulb is tightened the stuff inside squashes then snaps, causing it to blow.
Short in the wiring or light bulb socket.
backup light bulb socket is dirty or a wire is shorting out somewhere. check the bulb socket first.
No, the only thing it could possibly do is blow the bulb.
It is possible for a 150 watt halogen bulb to blow a fuse if it draws more electrical current than the circuit can handle. It is important to check that the circuit can support the wattage of the bulb to prevent overload and potential fuse blowing.
Behind the assembly is where the bulb goes. Unplug the electrical connecter. You turn the bulb 1/4 of a turn and pull it out. DO NOT touch the glass part at all as the bulb will possibly blow out when turned on.
Instead of blowing a fuse you'll blow up a light bulb if there is a surge.
Yes, common for bulb to blow. Take cover off, and twist round. Takes a really small bulb
sometimes there will be a fusible link that might blow, but not likely, either you have a burnt out light or corrosion has built up on the contact, sand the contacts and see if the light will work or substitute with a new bulb