Because when a light bulb is tightened the stuff inside squashes then snaps, causing it to blow.
A light bulb is made out of three items. A filament produces the light, glass gives the light bulb shape and controls the brightness, and the base allows the bulb to be placed in a socket.
A fluorescent light bulb contains a gas which produces UV light when it comes in contact with electricity. Contrary to a normal light bulb this does not create any heat and is far more energy efficient.
120
In an incandescent light bulb, air (Oxygen) leaked in and the filament (a wire) burns-well really melts. Halogens do this quite nice and LOUD.
if the lightbulb breakes it is goin to cut you deeply.
Either you have a short (in the wiring or socket), or you burned out the filament of your light bulb.
This sounds like a household light socket you are inquiring about, replace the bulb and socket as well.
For your lamp, you should use a standard medium base socket light bulb.
The standard light bulb socket size used in most households is called an E26 or medium base socket.
The screw socket into which an ordinary light bulb is inserted.
To convert a light bulb socket to an outlet, you can use a socket adapter that has an outlet built into it. This adapter can be screwed into the existing light bulb socket, allowing you to plug in and use electrical devices. Make sure to follow safety guidelines and consult a professional if needed.
Remove brake light interior trim panels. Then you push and twist the socket for the brake light that needs replacing. Then pull out socket. then pull out bulb from socket and place new bulb in the light socket. Once bulb is installed into light socket. Place the socket where you removed it from brake light housing. Push and twist clockwise to lock back in place. Then replace trim panels.
To change a light socket, first turn off the power to the light fixture. Remove the light bulb and unscrew the socket from the fixture. Disconnect the wires from the old socket and connect them to the new socket following the manufacturer's instructions. Screw the new socket into place and replace the light bulb. Turn the power back on and test the light to ensure it is working properly.
To replace a light socket, first turn off the power to the light fixture. Remove the light bulb and unscrew the socket from the fixture. Disconnect the wires from the old socket and connect them to the new socket, following the manufacturer's instructions. Screw the new socket into place and replace the light bulb. Turn the power back on and test the light to ensure it is working properly.
Socket
No, that would not be proper. The contact point of a light bulb socket has no need of any coating. A light bulb socket that is difficult to turn a bulb in will benefit from some light oil on the bulb threads prior to installing. Dielectric grease will harden, and is meant to insulate and protect electrical junctions from exposure and vibration.
The regular light bulb socket size for most common household lamps is called an E26 or medium base socket.