A light bulb is made out of three items. A filament produces the light, glass gives the light bulb shape and controls the brightness, and the base allows the bulb to be placed in a socket.
The coil ( filament ) is made of tungsten, the coil end support is made of nickel. the coil support is made of molybdenum,all held in glass tube.
elf tears, glass made from moon dust, metal forged in the fiery depths of mordor and matt damen's central cortex
The light bulb is made of five things. Glass, filament, support wire, metal tip and ceramic base.
In an incandescent light bulb, air (Oxygen) leaked in and the filament (a wire) burns-well really melts. Halogens do this quite nice and LOUD.
A filament bulb resistor is the common type of light bulb. It contain a thin coil wire called filament. It produces light as a result. It is made mainly from the element tungsten. The metle tungsten has very high melting point and it is a good conductor of electric current
A fluorescent light bulb contains a gas which produces UV light when it comes in contact with electricity. Contrary to a normal light bulb this does not create any heat and is far more energy efficient.
Because when a light bulb is tightened the stuff inside squashes then snaps, causing it to blow.
120
the light bolb
first of all, you need a bulb, a wire, and ONE light bulb. You clip the wire on the battery and touch the wire on the bottom of the light bulb
A light bulb is a high resistance wire surrounded by the bulb filled with an inert gas. When electric conducts through the wire, energy is lose as heat and light.
Filament. Correct; made of tungsten wire in most incandescent bulbs.
In an incandescent light bulb the wire that gives off the light is called the Filament.
the wire in your light bulb is a resistor :)
filament
If you are talking about the light circuit then : The Battery, The bulb and the wire.
the Sparks on the copper makes the wire on the light bulb makes the 9v light bulb turn on.
Make a circuit with 2 wires a batery and a light bulb and touch wire to medle on light bulb
When connecting a volt meter to a light bulb to measure the voltage of the light bulb, run a third wire from where the wire enters the bulb to one terminal of the voltmeter and a fourth wire from the other side of the bulb to the other terminal of the voltmeter.
the main reason for a light bulb to break is, the light bulb heats the tungstin wire. When the tungstin wire gets heated to much it breaks, causing thi light bulb to stop working.