If it were less than a number of Megohms it would not be insulation.
ohm's measure resistance, the more ohm's the more resistance the less voltage
By Megger testing (meggering) of the motor any one can measure the IR of the motor. MEGGER is a device used to measure IR. Analog Megger device may generate 500 volts..it gives coil to coil or coil to body IR value...it should not be less than 2 Mega ohm, generally it should be or kept more than 5 mega ohm...thanks ...DEEPAK RAJPUT
1 mega ohm=______________ ohm?
I think you mean megohm-meter or "megger" which is a high voltage, low current electrical insulation tester.
65 meg ohm if it is 11 kv
ohm's measure resistance, the more ohm's the more resistance the less voltage
Megger is usually short for Mega Ohm Meter. It measures high values of resistance with good accuracy. Most often used to test insulation.
This is relative to the purpose or application. 1 mega ohm may be considered "low resistance" when testing insulation levels; when testing a cable, 1 ohm may be too much. When testing substation ground grids, I believe 1 ohm is the maximum allowable value in some countries.
If you measure a small resistance with the megger set in Mega ohm range you get a very tiny and inaccurate result, and If you measure a huge resistance with the megger set to mega ohm range it will bottom out. To get the most accurate measurements you want what you're measuring to be about the same as the scale you're using.
The net effective resistance of resistors in series is the sum of the individuals.Combined resistance = (100,000,000) + (10) = 100,000,010Ωhms.
2 meg ohms, 2,000,000 ohms to ground. 1 meg ohms.
By Megger testing (meggering) of the motor any one can measure the IR of the motor. MEGGER is a device used to measure IR. Analog Megger device may generate 500 volts..it gives coil to coil or coil to body IR value...it should not be less than 2 Mega ohm, generally it should be or kept more than 5 mega ohm...thanks ...DEEPAK RAJPUT
1 mega ohm=______________ ohm?
The name given to the law of resistance is Ohm's Law.
A measurement of electrical resistance. It is dimensionally equivalent to Volts / Amperes. (Voltage / Current)AnswerAn ohm is the unit of measurement of resistance. Resistance is not affected by either voltage or current, but by the length, cross-sectional area, and resistivity of the conductor.
Ohm. After Georg Simon Ohm
Voltage = Current * Resistance (Ohm's law)