answersLogoWhite

0

Improper handling can completely destroy (or severely damage, causing a delayed failure) many electronics components, without the person handling them becoming aware that anything had even happened at the time the part was destroyed (or severely damaged).

User Avatar

Wiki User

8y ago

What else can I help you with?

Continue Learning about Electrical Engineering

What are main components of ac generator?

north and south magnets, a coil, commutators, output, and a handle LOL


How many watts in computer's 230 volts?

It depends on the current being drawn by the computer's components. The voltage will remain constant at 230V and should have a maximum amperage rating labeled on the power supply. Multiply the volts times the max amp rating to find out the max wattage that the power supply can handle. The watts actually being used is probably lower than the rated max (and should be).


Can a 12 volt system run 13 volts?

Yes, a 12-volt system can typically handle 13 volts, as many 12-volt systems are designed to accommodate slight voltage variations. This is especially common in automotive applications where the charging system can output around 13.8 to 14.4 volts when the engine is running. However, prolonged exposure to higher voltages may risk damaging sensitive components, so it's important to ensure compatibility.


Can a 20 amp handle 5000volts?

A 20 amp circuit can theoretically handle 5000 volts in terms of voltage rating, but it depends on the insulation and components used in the system. The current (20 amps) refers to the maximum current the circuit can carry, while voltage (5000 volts) refers to the potential difference. For practical applications, appropriate safety measures, insulation, and equipment designed for high voltage are crucial to prevent hazards. Always consult with a qualified electrician or engineer for specific applications.


What is the difference is 22D and 22M for connector contact size ratings?

22 will handle wire sizes 22-26 22D will handle wire sizes 22-28 22M will handle wire sizes 22-24

Related Questions

Why is my toilet handle not flushing properly?

Your toilet handle may not be flushing properly due to a few common reasons such as a broken or loose handle, a faulty flapper or chain, or a problem with the flush valve. It is important to check these components and make any necessary repairs or replacements to ensure proper flushing function.


Why is it important to handle soiled linen and clinical waste properly?

It is important to handle soiled linen and clinical waste properly to prevent the spread of germs, pathogens, viruses, toxins, infections and other harmful bacteria.


How do the intricate workings of a computer contribute to its overall functionality and performance?

The intricate workings of a computer, including its hardware components and software programs, work together to process data, execute tasks, and perform functions. The hardware components, such as the CPU, memory, and storage devices, handle the physical processing and storage of data. The software programs, including the operating system and applications, control how the hardware components interact and execute tasks. The efficient coordination of these components and programs is essential for the computer to function properly and perform tasks quickly and accurately.


Why do you have to handle the microscope properly?

Handling the microscope properly is important to prevent damage to the delicate lenses and internal components. Proper handling also ensures that the microscope remains calibrated and provides accurate results during observations. Failure to handle the microscope correctly can result in decreased image quality and potential costly repairs.


When the large computer invented?

The same time as the early computers. They were large because their components (vacuum tubes) were large, not because they could handle large problems.


How do I properly install a new Delta faucet handle?

To properly install a new Delta faucet handle, first remove the old handle by unscrewing it. Then, place the new handle onto the faucet stem and tighten it securely. Make sure the handle is aligned properly and test it to ensure it functions correctly.


What are the components of a vegetable peeler?

A handle with a blade in it.


Which is more important for a manager computer literacy or information literacy?

information literacy because a manager doesn't need to have much knowledge in computer but how to handle the information well.


Why won't the door handle latch properly?

The door handle may not latch properly due to a misalignment of the latch mechanism, a worn-out latch, or a loose connection between the handle and the latch.


Why is the door handle not latching properly?

The door handle may not be latching properly due to wear and tear, misalignment, or a faulty latch mechanism.


What are the different components of toilet internals and how do they work together to ensure proper functioning of the toilet?

The main components of toilet internals are the fill valve, flush valve, flapper, and handle. The fill valve controls the water level in the tank, while the flush valve releases water into the bowl when the handle is pressed. The flapper seals the flush valve to prevent water from leaking, and the handle activates the flushing mechanism. Together, these components work to ensure that the toilet flushes properly and refills with water after each use.


Will your computer handle Minecraft with no lag?

That depends on your computer.