Tinning is a process of coating leads or other component parts with solder before making a soldered joint. It is done to ensure that the surfaces to be joined will have a good adhesion to the solder to ensure a robust and secure joint. If leads are not tinned before hand, there is a risk of a dry joint - a joint that might appear to be good but in fact does not have solder in intimate contact with the component. Most dry joints have an appearance that exposes the fault but not all do.
The term tinning is used as tin is a component of solder (traditional solder is a mix of tin and lead). Tinning now usually means applying solder as described above but it can also mean applying a coating of tin without lead. Using pure tin is rarely if ever used today.
Worldwide there is a move to eliminate lead from electronic assemblies and so tin/lead solder is being replaced. Tin is still used but mixed with copper, silver, zing and other more exotic metals. The process of tinning still takes place even with the new lead free solders.
PU stands for pickup. It is one of the many settings that are used while trying to set the right relay.
Knowing the power rating of a transformer will help an operator use the transformer within its design limitations with regard to heating of the windings and their insulation.
Ask your supervisor or manager, safety specialist, or human relations person. Also look at the Safety Data Sheets for the materials that are used in your workplace, and at the writen procedures that have been established by your employer with regard to safety in the workplace and safe work practices.
Up. ---- I'm not sure what the question is getting at. USUALLY THIS QUESTION IS ASKED WITH REGARD TO THE "GROUND" PRONG of a standard 3wire, 120 volt receptacle In the USA there are no requirements which dictate whether a receptacle outlet should be mounted with the ground UP or DOWN. In fact, it is also proper to mount the receptacle horizontally.
DefintionTorque -- also called MOMENT OF A FORCE, in physics, the tendency of a force to rotate the body to which it is applied.The torque, specified with regard to the axis of rotation, is equal to the magnitude of the component of the force vector lying in the plane perpendicular to the axis, multiplied by the shortest distance between the axis and the direction of the force component. Regardless of its orientation in space, the force vector F can always be located in a plane parallel to the axis.Torque Equations of Motors:
The phrase is "to thumb ones nose at".
The correct answer is "in regard to". Even better, "this is regarding ..."Don't forget that "regards" usually means an expression of sentiment something like "best wishes", as in, "Please pass along my regards to your father." or, as in the old musical number, "Give my regards to old Broadway!"According to the Dr. Grammar site:In regard(s) to?"The use of the plural regards in the phrases in regards to and with regards to is incorrect. Since each phrase shows its speaker regarding just one issue, the regard is singular: in regard to and with regard to.[Examples:] I am calling in regard to your memo.With regard to our meeting, I cannot attend." (Strumpf and Douglas, The Grammar Bible 220).
"Celebrate your birthday" is what you do in regard to the French phrase ton anniversaire.Specifically, the masculine possessive adjective ton means "(informal singular) your". The masculine noun anniversaire translates as "birthday". The pronunciation will be "toh-nah-nee-vehr-sehr" in French.
Think about this and you can figure it out. An idiom seems to mean one thing but actually means another. Does "with regard" mean just what it seems to? Yes, it does. Therefore, this phrase is not an idiomatic expression.
wrto ; WRTO. With Reference to or With Regard To. Also RSVP , the initials of the French phrase. 'Repond s'il vous plait'. Reply if you please. 'An answer is requested'.
yes. After with regards you would put your name.
The phrase 'a lot of nerve' refers to having a lack of regard for social protocol preventing certain actions.
No one is the more commonly used phrase of the two, but nobody would normally regard 'noone' as two words.
This is a semi-Hebrew phrase, but Jews would never use this phrase in prayer. Jews regard the name as too holy to pronounce (Talmud Sanhedrin, Mishna 11:1).
"None puto" can be translated from Latin to mean "I consider none." It is a phrase used to express that someone does not consider or regard something.
"Dmee shehf duh raw" is the pronunciation of the French phrase demi chef de rang. The translation of the masculine singular prepositional phrase will be "line cook" or "station chef" in regard to the person in question, who is answerable to the head waiter (chef de rang).
"My queen" is an English equivalent of the Spanish phrase mi reina. The feminine singular phrase may be used literally in regard to a female monarch and loosely as an endearment. The pronunciation will be "mee REY-na" in Uruguayan Spanish.