0
What else can I help you with?
230V line to line a single phase?
Yes. 230V line to line is considered single phase power. The 115v half part of that is called split phase. It should not be called two phase, as it is one phase that has been center tapped and grounded at the neutral point - it is still one phase power.Answer230 V is the standard nominal voltage for residences in Europe. 230 V is the line-to-neutral voltage (phase voltage). Low-voltage distribution is by three-phase, four-wire, system with a nominal line voltage of 400 V and a nominal phase voltage of 230 V.
What happens when a 230V dc series motor supplied by 230V ac?
it will not run
What is the difference between 3-phase and 1-phase?
Up to 10 Ampere standard applications are designed with phase power supply.For conducting current larger than 10 A, especially for driving motors in industrial applications, all the applications are normally designed for three phase power supplies.AnswerA three-phase system is more economical, in terms of the volume of copper required (around 75%), than a corresponding single-phase line supplying the same load. Three-phase systems deliver energy continuously, rather than in pulses. Three-phase motors are self-starting and more compact than a single-phase motor of similar capacity. Despite this, 'most' homes don't require three-phase supplies and are provided with a single-phase service (having said that, in some countries, such as Cyprus, three-phase residential supplies are common).
How do you convert 230v to 208 volts single phase?
A source of 208 volts can be obtained from any two legs of a three phase four wire 208 volt system. The two legs are classed as single phase 208 volts. The lead tags can be L1-L2, L2-L3, or L3-L1 all of which will give you 208 volts. Any of these lead tags to the grounded star point (wye) will give you 120 volts.
How can I convert standard American 240 volts 3 phase to 1 phase 2 wires 1 hot and 1 neutral?
It doesn't need to be converted. The 240 Volt single-phase electricity is there already to operate any single phase devices. New breakers, the right size of wiring and a new wall outlet are what have to be installed to add a new single phase 240 Volt circuit to an existing breaker panel which already has a three-phase supply. For safety reasons only a trained and licensed electrician should work with this equipment. Careful! The statement above can be misleading. The Asker is obviously not from the US, he thinks US 240V is three phase, when its really single-phase. But note that he wants to convert to single-phase with one hot and one neutral. This is consistent with European standards with 230V single-phase where one wire is hot and one wire is cold (neutral). You cannot connect a European 230V appliance directly to US 240V because this would connect a hot wire to the appliance's grounded connection, potentially making the chassis components hot! So, while it is true nothing needs to be done to convert US 240V service to single-phase (because it already is), it is not correct to imply that US 240V can be used where you want 240 volts with one hot and one neutral. This would require an isolation transformer or other approved international voltage converter. For more information see the answer to the Related Question Can you plug a 230V 50Hz appliance into a 240V 60Hz outlet? shown below As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed.If you do this work yourself, always turn off the powerat the breaker box/fuse panel BEFORE you attempt to do any work ANDalways use an electrician's test meter having metal-tipped probes(not a simple proximity voltage indicator)to insure the circuit is, in fact, de-energized.IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOBSAFELY AND COMPETENTLYREFER THIS WORK TO QUALIFIED PROFESSIONALS.
Will it hurt 230 volt single phase motor plugged into 277 V single phase?
Yes, plugging a 230V single phase motor into a 277V single phase power supply can potentially damage the motor due to the higher voltage. It is recommended to match the voltage ratings of the motor and power supply to prevent any issues.
What is the amperage of a 20 HP 240v single phase motor?
Typically single phase motors go up to 10hp. Wouldn't be very efficient at about 100 amps. A 20hp 3 phase motor at 230v pulls 52 amps. The 10hp single phase 230v pulls 50 amps.
What is the type of motor used in running a lathe spindle?
230V/1Ph/50Hz 1HP (0.75 kW)Motor Capacitor start induction motor ( single phase)
The motor states 120v single phase to operate.can you use it using 230v supply in Singapore?
Absolutely not. In the U.S. all power is 120v on a single line (one hot, one neutral, one ground) overseas all power is 230v on a single line. Will fry your unit. You can however by a step down or up transformer fairly cheaply at radio shack.
Motor for pool pump sp1607z1m?
AO SMITH UST1102 1.0 HP, 3450 RPM, Single Phase, 115/230v
Can you convert 415v 3 phase to 230v single phase?
415V 3 phase is the line to line voltage. The line to neutral of this supply is 230V single phase. Therefore you use one of the phases and the neutral.
How many amps will a 3 hp motor pull on 230 volts?
It depends on the voltage of the motor, and whether it is single-phase or 3-phase. A 120 VAC 2HP single phase motor draws almost 20 amps, a 240 VAC single-phase 2HP motor draws about 10 amps. A 480 VAC 2HP three-phase motor only draws about 6 amps.
What is the Single phase voltage in India?
The single phase voltage in India is 230v when we check with the phase and the nutral single line
What is 3 phase voltage in Germany?
Three-phase voltage in Germany is 400V, single-phase voltage is 230V.
How many amps does a 1.5 hp 230v 3 phase motor draw?
For a 1.5 hp 230v 3 phase motor, you can calculate the amperage using the formula: Amps = (HP x 746) / (Volts x Efficiency x Power Factor x √3). Assuming an efficiency of 0.85 and a power factor of 0.8, the amperage draw would be approximately 4.3 Amps.
What voltage you get at home in India?
The single phase voltage in India is 230v when we check with the phase and the nutral single line
How many amps for 1hp 3phase?
For a 1hp 3-phase motor, the current draw will depend on the voltage supply. Typically, at 230V, a 1hp 3-phase motor will draw around 3.6 amps. However, this value may vary based on the motor efficiency and power factor.
