The neutral can be broken in some installations. One example is when wiring explosion proof equipment.
The neutral is a current-carrying conductor, the grounding wire is not; it is for safety as an ALTERNATE path to ground. For example, if something happens to disconnect the neutral or if the hot side comes into contact with conductive portions of an appliance, the grounding conductor can save a life by providing a safe fault mechanism.
link is provided in neutral path of ac supply because it should provide a path for unbalanced currents , if we use fuse ,fuse may blow of and damage the entire system and also unbalanced currents may be more than the fuse rating
A 'hot' terminal is a slang expression for the line terminal of an AC supply. In Europe, for example, a single phase supply to a building has three conductors: line conductor, neutral conductor, and protective (earth) conductor. The line conductor has a potential of 230 V with respect to the neutral; the neutral conductor is at approximately the same potential as the earth conductor. In North America, there are two line conductors, which are at 240 V with respect to each other, and at 120 V with respect to the neutral.
To complete the circuit. The word neutral is a convention it does not mean it has no purpose
Not usually, if the three phase pump is a three wire pump then the disconnect does not need a neutral. The pump control may or may not need a neutral depending on the voltage system that the control panel needs.
The neutral is a current-carrying conductor, the grounding wire is not; it is for safety as an ALTERNATE path to ground. For example, if something happens to disconnect the neutral or if the hot side comes into contact with conductive portions of an appliance, the grounding conductor can save a life by providing a safe fault mechanism.
link is provided in neutral path of ac supply because it should provide a path for unbalanced currents , if we use fuse ,fuse may blow of and damage the entire system and also unbalanced currents may be more than the fuse rating
Presumably, you are asking the purpose of a neutral conductor, rather than 'contactor'?A alternating-current supply has two conductors, a lineconductor and a neutral conductor. The line conductor is at system potential (e.g. 230 V in Europe), whereas the neutral conductor is at approximately earth (ground) potential because it is earthed (grounded) at the supply transformer. The neutral conductor acts as the 'return' path to the transformer, carrying the same load current as the line conductor.
What two colors may be used for the ground conductor (neutral)
A 'voltage' is another name for a potential difference. As the name implies, a potential difference exists between two different points or, in the case of an electrical installation, between the line conductor and the neutral conductor. So the neutral does not 'import voltages'. Voltages exist between the line (hot) conductor and the neutral conductor.
a good conductor should be electrically neutral.
A shorted circuit.
Conductor combining the functions of both a protective earthing conductor and a neutral conductor
I put my car in neutral because it broke down.
I put my car in neutral because it broke down.
A 'hot' terminal is a slang expression for the line terminal of an AC supply. In Europe, for example, a single phase supply to a building has three conductors: line conductor, neutral conductor, and protective (earth) conductor. The line conductor has a potential of 230 V with respect to the neutral; the neutral conductor is at approximately the same potential as the earth conductor. In North America, there are two line conductors, which are at 240 V with respect to each other, and at 120 V with respect to the neutral.
It depends on the electrical standards of the country in which you live. In Europe, for example, the line conductor(not 'phase conductor'!) is brown, the neutral conductor is blue, and the earth conductor* is green/yellow stripe.[*properly called a 'protective conductor']