What limits the use of a transformer is its operating temperature, as excessively-high temperature will act to break down its insulation. The temperature reached by a transformer is a function of its rating (expressed in volt amperes), so operating a transformer below its rating is perfectly okay.
VA or KVA or MVA
To calculate the kVA rating of the transformer, you can use the formula: kVA = (Voltage × Current) / 1000. In this case, the secondary winding delivers 10 amps at 480 volts. Therefore, the kVA rating is (480 V × 10 A) / 1000 = 4.8 kVA.
To determine the transformer rating in KVA for a 55 kW motor, you can use the formula: KVA = KW / Power Factor. Assuming a typical power factor of 0.8 for motors, the calculation would be KVA = 55 kW / 0.8 = 68.75 KVA. It's advisable to round up, so a transformer rated at 75 KVA would be appropriate to ensure adequate capacity.
The rating of the machine (kva or kw) depends upon the power factor, since the load power factor to which the transformer is supplying power is not known, it may be capacitive, inductive, or resistive that is why its rating is in kva not in kw.
copper loss is directly propostional to I (AMPERE) and iron loss directly propostional to V (VOLTAGE) then total losses is equal to volt ampere hence the rating of transformer in KVA. SULTAN
Depends on the kva rating of the devices to be tested using a transformer.
yah! definately affects, the kva of transformer is suitable for the certain load according to the rating.
transformer action doesn't depend on power factor that is why we indicate its rating in KVA
VA or KVA or MVA
You can tap off approximately 833 200 amp panels from a 250 kVA transformer. This calculation is based on dividing the kVA rating of the transformer by the current rating of the panel.
To calculate the kVA rating of the transformer, you can use the formula: kVA = (Voltage × Current) / 1000. In this case, the secondary winding delivers 10 amps at 480 volts. Therefore, the kVA rating is (480 V × 10 A) / 1000 = 4.8 kVA.
Yes, but your input current is going to be high at 133 amps. The output of the transformer is not going to be 16 KVA, that is the rating of the transformer.
This is the rated output of the transformer, obtained by multiplying the rated secondary voltage by the rated secondary current. And it's 'kV.A', not 'kva'.
To determine the transformer rating in KVA for a 55 kW motor, you can use the formula: KVA = KW / Power Factor. Assuming a typical power factor of 0.8 for motors, the calculation would be KVA = 55 kW / 0.8 = 68.75 KVA. It's advisable to round up, so a transformer rated at 75 KVA would be appropriate to ensure adequate capacity.
ka of mccb=transformer(KVA)x100/1.732xsecondary voltagex%impedence of transformer
The kW rating of a transformer can be calculated by multiplying the kVA rating by the power factor. For example, if the power factor is 0.8, then the kW rating of a 100 kVA transformer would be 80 kW. You can also use the formula: kW = kVA x power factor.
The kVA rating will be listed on the transformer's nameplate, which is usually on the front of the transformer. The 480v to 120v is irrelevant, because many transformers with different kVA ratings convert 480 volts to 120 volts. The kVA ratings can be different and thus affect the rated current through the transformer.