0
Yes, you can use 6 mm² (rm) cable for an 11 kW motor, but it depends on the specific installation conditions, including the length of the cable run and the application's ambient temperature. Typically, 6 mm² cable is suitable for motor currents up to around 25-30 amps, but it's essential to check local electrical codes and guidelines to ensure it meets safety standards. Additionally, consider factors like voltage drop and cable type to ensure optimal performance and safety. Always consult a qualified electrician for precise requirements.
What else can I help you with?
What cable size to use for a 1 kw motor for a 400v 50 hz 3 phase supply?
3 core 35 sq mm alu. Or 3 core 25 sq mm cup.
For 225 kw motor what is the amps star and delte and what is the cable size required?
Need to know what the voltage of the motor is.
What is the cable size for 600V 3 phase ac motor?
you need the current of motor or the KW/HP rating
Can you use 2.5sqmm wire for a 7.5 kw motor?
No you can not it's 31 amps
What is the cable size for 7.5 kw 3 phase motor?
Assuming it is a 400 V three-phase motor, the phase current is 11 amps, or more if the power factor is less than 1.0 (or the supply voltage is different). If it is a 400 V motor the cable should be capable of carrying 16 amps, so a 2.5 mm-sq 4-core cable is needed.
What cable size to use for a 1 kw motor for a 400v 50 hz 3 phase supply?
3 core 35 sq mm alu. Or 3 core 25 sq mm cup.
For 225 kw motor what is the amps star and delte and what is the cable size required?
Need to know what the voltage of the motor is.
What is the cable size for 600V 3 phase ac motor?
you need the current of motor or the KW/HP rating
Which size cable use for 37 kw induction motor?
For a 37 kW induction motor, a cable size of approximately 10 AWG (American Wire Gauge) would be suitable for typical installations. However, the specific cable size required would depend on factors such as the length of the cable run, ambient temperature, and voltage drop considerations. It is recommended to consult with a qualified electrician to determine the appropriate cable size for your specific application.
What is the cable size for 11 kw 3 phase motor?
Incomplete data: To have an accurate result - please provide the following; 1. Voltage Rating - Low Votage or Medium Voltage Applications? 2. Efficiency 3. Power Factor 4. Distance - One way distance from source 5. Location and method and arrangement of Installation 6. Allowable or acceptable voltage drop 7. Type of cable - PVC or XLPE cable with same size has different ampacity
100 hp motor at 480 volts what kw?
To convert horsepower (hp) to kilowatts (kw), you can use the conversion factor of 0.746. Therefore, for a 100 hp motor, the power in kilowatts would be 100 hp * 0.746 = 74.6 kW.
Can you use 2.5sqmm wire for a 7.5 kw motor?
No you can not it's 31 amps
What is the cable size for 7.5 kw 3 phase motor?
Assuming it is a 400 V three-phase motor, the phase current is 11 amps, or more if the power factor is less than 1.0 (or the supply voltage is different). If it is a 400 V motor the cable should be capable of carrying 16 amps, so a 2.5 mm-sq 4-core cable is needed.
How much energy does a household electric fan use?
Typical motor and belt efficiencies: * Motor 1kW - 0.4 * Motor 10 kW - 0.87 * Motor 100 kW - 0.92 * Belt 1 kW - 0.78 * Belt 10 kW - 0.88 * Belt 100 kW - 0.93Depending on the motors input , we can measure the voltage consumed by a ceiling fan.Normally , household fans consume 200 - 400 watts of energy.hope this helps =)
7.5 kw motor what is the hp 4 at?
A 7.5 kW motor is equal to 9.916 horsepower.
What is the cable size of 110 KW motor?
The cable size depends on a few factors, such as the supply voltage, the method of starting the motor, (direct-on-line, or star delta) and the length of cable required to compensate for voltage drop. Also, if the cable is copper or aluminum.110 kW motor has a rated current of 200 amps at 415 volts, so the correct copper cable size would have a cross-sectional area of 75 square mm., if the motor is started direct-on-line.At 660 volts, the rated current would be 118 volts and the cable size would be 35 square mm.
What is the starting current of 315 kw 380v motor..pf of .80 percent 3 phase..and what is the circuit breaker to use..sub breaker and main breaker?
starting current of 315 kw motor in start delta 2.5 time for single sec. if your cable lingth 130 meter u can use 150mm2 (3 cable per phase) 150mm2 single cable current 292 Amp voltage drop 0.28/meters so u can use breaker 1000 Amp and set Im time (for starting current) setting avalible in breaker.
