0
What else can I help you with?
What is the cable size of 110 KW motor?
The cable size depends on a few factors, such as the supply voltage, the method of starting the motor, (direct-on-line, or star delta) and the length of cable required to compensate for voltage drop. Also, if the cable is copper or aluminum.110 kW motor has a rated current of 200 amps at 415 volts, so the correct copper cable size would have a cross-sectional area of 75 square mm., if the motor is started direct-on-line.At 660 volts, the rated current would be 118 volts and the cable size would be 35 square mm.
Would 10mm sq cable suit an 18kw 3 phase 415 volt motor over 25mt length?
The motor would draw about 24 kVA which is 35 amps. For this you would need 10 mm2 cable.
What is cable size for 3 110kw 3 phase induction motor 100 meter run for cable 400v?
first calculate the full load amps of the motor by using formula, line amps = KW * 1000 / (line volts*1.732*P.F) Of the mentioned motor the amps will be 96 amps at the P.F 0.8. The motor will have star delta starter so the cable size would be 2 runs of 3c x 70 sq mm AL if laid in air.
What is the cable size for 7.5 kw 3 phase motor?
Assuming it is a 400 V three-phase motor, the phase current is 11 amps, or more if the power factor is less than 1.0 (or the supply voltage is different). If it is a 400 V motor the cable should be capable of carrying 16 amps, so a 2.5 mm-sq 4-core cable is needed.
What size cable for 90kW 3phase 440v 50Hz motor?
To size cable the amperage must be known. Use the following equation to find amperage. Amps = kW x 1000/1.73 x volts x pf. A standard motor's power factor between 10 to 100 HP is .86 to .92. Amps = 90 x 1000 = 90000/ 1.73 x 440 x .92 = 90000/700 = 128 amps. Motor feeders have to be rated at 125% of the motor full load amperage. 128 x 125% = 160 amps. A 2/0 copper conductor with an insulation factor of 75 or 90 degrees C is rated at 175 and 185 amps respectively.
What is cable size in mm2 required for 450 amps?
To determine the cable size in mm2 required for 450 amps, you need to consider the current-carrying capacity of the cable. The exact size will depend on the type of cable and the installation conditions. For 450 amps, heavy-duty cables with a size of around 240 mm2 or larger would typically be used to ensure safe and efficient operation.
How much capcacity of mm size four core cable well be used in running 1kw three faze motor?
Depends on the type of cable, the method of fixing the cable, the ambient temperature and the way the cable has been run to the motor (i.e in trunking, Conduit) Bascially a cable with a current carry capasity of 2 amps should be fine (1.45 amps with power factor of unity and no de-rating factors). Remember 1mm cable can carry at least 8 amps. Also please improve your English when asking stupid questions!!
Would 10mm sq cable suit an 18kw 3 phase 415 volt motor 25mt length?
The motor would draw about 24 kVA which is 35 amps. For this you would need 10 mm2 cable.
What is the cable size of 110 KW motor?
The cable size depends on a few factors, such as the supply voltage, the method of starting the motor, (direct-on-line, or star delta) and the length of cable required to compensate for voltage drop. Also, if the cable is copper or aluminum.110 kW motor has a rated current of 200 amps at 415 volts, so the correct copper cable size would have a cross-sectional area of 75 square mm., if the motor is started direct-on-line.At 660 volts, the rated current would be 118 volts and the cable size would be 35 square mm.
What is the start up amps on a 200 hp 3 phase 480 volt motor?
i have 200 hp motor what i need cable size in 100 feet distance
Would 10mm sq cable suit an 18kw 3 phase 415 volt motor over 25mt length?
The motor would draw about 24 kVA which is 35 amps. For this you would need 10 mm2 cable.
What is the cable size for motor 15kw 440 volts connection?
The current draw is about 27 amps. A motor feeder has to be 125% of the motors full load amperage. 27 x 125% = 33 amps. A #8 copper conductor with an insulation factor of 90 degrees C is rated at 40 amps.
What is cable size for 3 110kw 3 phase induction motor 100 meter run for cable 400v?
first calculate the full load amps of the motor by using formula, line amps = KW * 1000 / (line volts*1.732*P.F) Of the mentioned motor the amps will be 96 amps at the P.F 0.8. The motor will have star delta starter so the cable size would be 2 runs of 3c x 70 sq mm AL if laid in air.
What is the cable size for 7.5 kw 3 phase motor?
Assuming it is a 400 V three-phase motor, the phase current is 11 amps, or more if the power factor is less than 1.0 (or the supply voltage is different). If it is a 400 V motor the cable should be capable of carrying 16 amps, so a 2.5 mm-sq 4-core cable is needed.
How many amps for a 0.75mm cable?
5 amps
How many amps does a 12volt 2hp motor draw?
124.3 amps. If you have one on a vehicle, for example a winch, use no less tha 00g cable. That is a LOT of power, and an ordinary alternator can't handle that.
What size swa cable is required to supply a door heater carrying 18.9Amps per phase?
Cable for 19 amps continuous should have a cross-section area of 6 mm2.
