0
What else can I help you with?
What does a high degree of freedom mean?
A high degree of freedom means that an appendage can pivot or rotate in numerous of ways. The definition of 'high' is not specifically defined, but usually an appendage that can pivot or rotate in more than six or seven ways is considered to have a high degree of freedom.
What is the take off measurement of 45 degree elbow 18 inches pipe?
11 1/4
What is the degree of freedom for EOT crane?
1 ton
What issues arise when cutting a 6 inch schedule 80 x 90 degree elbow to make 2 x 45 degree elbows?
cut a 22 1/2 out of it
How do cut an elbow at any degree in a pipe?
To cut an elbow at any degree in a pipe, first, use a protractor or an angle finder to determine the desired angle. Mark the cutting line on the elbow with a marker or chalk, ensuring it's straight and even. Use a pipe cutter or a saw to carefully cut along the marked line, maintaining a steady hand for a clean cut. Finally, deburr the edges with a file or sandpaper to ensure a smooth finish for proper fitting.
How many degrees of freedom does a human arm have?
arm has not 6 but 7 degree of freedom.. 1.shoulder have 1 degree of freedom. 2.yaw have 2 degree of freedom. 3.roll have 3 degree of freedom. 4.elbow have 4 degree of freedom. 5.wrist have 5degree of freedom. 6.wrist yaw have a 6degree of freedom. 7.wrist roll have a 7 degree of freedom.
Do elbow 135 degree and elbow 45 degree are same?
No, elbow 135 degree and elbow 45 degree are different from each other.
How find the 90 degree elbow center?
How to calculate 90 degree and 40 degree elbow center >For 90 degree elbow(Dia*38.1) this formula used for only 90 degree elbow. >For 45 degree elbow(45/2of tan*Dia*1.5*25.4) this answer obtained in (mm).
Degree of freedom in classical mechanics?
Number of independent coordinates that are required to describe the motion of a system is called degrees of freedom. In a system of N -particles, if there are k -equations of constraints, we have n  3N  k number of independent coordinates. n  degrees of freedom
How to find the center of a screwed 45 degree elbow-?
You find the center of a screwed 45 degree elbow by bisecting the angle.
What is elbow center for 1 inch standard elbow?
90 degree
What is the take out of a 6 inches socket weld 90 degree elbow?
what is the take out of 6 inches pipe of a socket weld 90 degree elbow
What is the take out of 6 inches socket weld 90 degree elbow?
what is the take out of 6 inches pipe of a socket weld 90 degree elbow
What degree do you have to get to be a mechanic?
Mechanics need to train for a bachelors degree
What is the take off measurement for 6 Victaulic 22.5 degree elbow fitting?
1-13/16"= The tangent of half the degree X the radius of the elbow.
How can you cut a 90 degree elbow to make up 34 degree angle?
To cut a 90-degree elbow to create a 34-degree angle, you need to make a precise cut on the elbow joint. First, measure out 34 degrees from the centerline of the elbow using a protractor or angle finder. Then, mark the cut line on the elbow and use a saw to carefully cut along this line. Ensure the cut is smooth and straight to achieve the desired angle for your project.
What is the miter cut for a 45 degree elbow?
30
